CP45-英文版培训教材.pdf - 第120页
Operating Manual Reference Figure CP-45/55 Operation Process F and R in the number of Feeder Lane represents the front Feeder Base and the Rear Feeder Base respectively. ^ <Available> List Box This displays the ava…
Operating Manual Reference Figure
CP-45/55 Operation Process
^ <OK> Button
This saves the option selected
above and closes the Dialogue
Box.
^ <Cancel> Button
This cancels the option selected
above and closes the Dialogue
Box.
This screen is to set the
individual Feeder Lane to be used
for Feeder Arrangement on
Optimizer. Units possible to arrange
on Feeder Lane are Tape Feeder,
Stick Feeder Unit, Moving ANC,
Feeder Lane Fixed Camera Unit,
etc. On this screen you can assign
the Feeder Lane prohibiting unit
from arrangement on the Optimizer.
^ <Arranged> List Box
This shows the status of
Feeder Lane and Tape Feed
placed already, Moving ANC,
Camera, etc.
* Setup Menu/Feeder Lane
Operating Manual Reference Figure
CP-45/55 Operation Process
F and R in the number of
Feeder Lane represents the front
Feeder Base and the Rear Feeder
Base respectively.
^ <Available> List Box
This displays the available
Feeder Lane for arranging
newly the Tape Feeder, Stick
Feeder Unit, Moving ANC,
Feeder Lane Fixed Camera Unit,
etc. If you don't want to arrange
any unit on the certain feeder
lane, click the arrow button
and move to the <Prohibited>
List Box.
Operating Manual Reference Figure
CP-45/55 Operation Process
^ <Prohibited> List Box
Set this in order that the
Feeder Lane not allowable to
arrange on the Feeder Unit or
ANC, Camera, etc. is to be
shown in this area. The
optimizer does not arrange any
unit on the lane shown in this
area. However, it is needless to
assign separately the lane on
<Prohibited> in consideration of
widths of Feeder Unit or ANC,
Camera Unit, etc. The optimizer
can arrange the unit to be
arranged on the Feeder Lane
without mechanical interferences
in consideration of its width.
Use the arrow buttons
and
for movements between
<Available> and <Prohibited>
List Boxes.