CP45-英文版培训教材.pdf - 第204页

Operating Manual Reference Figure CP-45/55 Operation Process Step5 : Ratchet Pawl Adjustment If the ratchet pawl is offset to left or right direction from the center reference line of the gear on the g ear monitor of the…

Operating Manual Reference Figure

CP-45/55 Operation Process

Step4 : Releasing the Ratchet Pawl Locked

Secure the driver of ratchet pawl with "screwdriver"(at the left side of feeder) and release the locked

ratchet pawl by turning the box wrench(at the right side of feeder).

With the box wrench of the right ratchet pawl secured, separate slightly the ratchet pawl from the gear with "slotted

screwdriver" of the left ratchet pawl.

Left Ratchet Pawl

("Screwdriver" Driver

Using)

Right Ratchet Pawl

(Box Wrench Using)

Operating Manual Reference Figure

CP-45/55 Operation Process

Step5 : Ratchet Pawl Adjustment

If the ratchet pawl is offset to left or right direction

from the center reference line of the gear on the gear

monitor of the feeder fixed as shown in the following

figures, release the lock of the push pawl to arrow

direction of (1) as shown in the right figure, and

secure the wrench of (2) by the other hand so that the

push pawl of (2) can not be moved. Align the center

of the gear on the gear center reference line of the

line indicator by turning the push pawl adjusting

wrench of (2) as shown in the following figures. At this

time, tighten the push pawl locker by turning it to (3)

direction lightly since the ratchet pawl should be

adjusted again. At this time secure the wrench by the

other hand so that the push pawl of (2) can not be

moved.

(1)

(2)

(3)

Operating Manual Reference Figure

CP-45/55 Operation Process

Step6 : Ratchet Pawl Adjustment

(Backlash Adjustment)

After completing the push pawl adjustment, with the cylinder push

button fixed on the left side of inspection jig pressed down, lock the

push button by turning it to clockwise as shown in (a) figure. If the

push pawl and the ratchet pawl are failed to be placed in the regular

position, backlash will be occurred as shown in the following figure.

Then, adjust the position of ratchet pawl of socket with the following

methods. Firstly, release the locked ratchet pawl by securing the screw with

"screwdriver"(from the left side) and turning the box wrench (from the right

side). And, with the right box wrench of the feeder secured, adjust the

ratchet pawl by turning it to left and right directions with "screwdriver" in

order that it can be placed in the regular position as shown in the right

figure. If the adjustment is completed, re-inspect the backlash and offset

of the gear reference position by releasing the locking of the cylinder push

button and pressing the push button. If backlash and offset of the gear

reference position are occurred, repeat step 4) and 5) to obtain the correct

adjustment.

Blacklash occurred

(a)

INSPECTION JIG