CP45-英文版培训教材.pdf - 第126页
Operating Manual Reference Figure CP-45/55 Operation Process Select the <Normal> for general PCB, and select <Strict> for PCB requiring the application of strict rule. <Search Depth> option is to determ…
Operating Manual Reference Figure
CP-45/55 Operation Process
However,iftherearealotof
defectives of unit PCB, the
latter can decrease the work
efficiency when comparing with
the former.
^ <Optimization Options> Area
This area is to set the self-
option of the optimized
algorithm executed on Optimizer.
Since basic selection is done,
you may use this as it is. For
the order of mounting the part
on PCB, mount the part in order
of from the higher to the lower.
Failing to observe this rule may
cause that the nozzle can be
crashed against the part which
has been mounted already.
<Component Height> option
determines how strictly this rule
applies. Applying this rule too
strictly may cause a program
of too low efficiency.
Operating Manual Reference Figure
CP-45/55 Operation Process
Select the <Normal> for general
PCB, and select <Strict> for PCB
requiring the application of strict
rule. <Search Depth> option is to
determine the execution method
of mounting order algorithm.
This is caused that it takes
too much time to execute the
optimizer generally for optimizing
the mounting order. Also, the
optimizer execution time
increases as the numbers of
mounting point increase. If you
selecting the <Quick>, you can
determine the mounting order
rapidly. However, in general, the
finial work efficiency is inferior
to a case which selects the
<Deep>. To increase the work
efficiency regardless of
optimizer execution time, select
the <Deep>.
Operating Manual Reference Figure
CP-45/55 Operation Process
Modifying this option may
have no effect on the array of
nozzle or feeder.
^ <Time(sec)> Edit Box Area
This area is to input time taking
when executing individual
movement on the unit and can be
used for calculating the work
time in the Optimizer. Also,
values of Tray Y and Tray Z
may have an effect on the
determination of work order.
Thus, be sure to input the value
close to the actual to increase
the work efficiency and take the
accurate prediction value of work
time.
# ANC : Time(sec) to be taken
for 1 time nozzle replacement
# Fiducial : Time(sec) to be taken
for Fiducial mark acknowledge
# Vision: Time(sec) to be taken
for acknowledging Vision part
in Fixed Camera