CP45-英文版培训教材.pdf - 第25页
Operating Manual MODEL Reference Figure CP-45/55 Operation Process 1.2) PCB Edit Procedure 1.2-1)File v New Create (New Board Program Create) 1.2-2) PCB Edit (1) Board / Part / Feeder / Step / Optimizer v Board ^ Custome…
Operating Manual
MODEL
Reference Figure
CP-45/55 Operation Process
*
General Board
Program (Only for Chip)
1. PCB Edit Overview & Edit
Procedure
This is to place parts of chip type
with general board and consists
of 4 steps of Board, Part, Feeder
and Step.
1.1) PCB Edit Overview
v
Board
Size: 200 X 200, 1EA
v
Part (Standard Part)
Use with Library: Chip R 2 kinds
registered
v
Feeder
Tape Feeder
: 1 Slot by each part
v
Step
12 Points Teaching
Consisted of 2 Cycles by
Part setting, Feeder option
and NZ,HD Finish….
Operating Manual
MODEL
Reference Figure
CP-45/55 Operation Process
1.2) PCB Edit Procedure
1.2-1)File
v
New Create
(New Board Program Create)
1.2-2) PCB Edit (1)
Board / Part / Feeder / Step
/ Optimizer
v
Board
^ Customer Name / Board Name
^ Coordinate (Coordinates Setting)
^ Board Size / Conveyor Width
^ Handling / PCB In Part
To (Work Part Register)
v
Part (Work Part Register)
^ Use with Library
Register to Part List
Align Data & Common Data Check
To Feeder (Feeder Setting)
v
Feeder (Feeder Register)
^ 1 Slot by each part
Operating Manual
MODEL
Reference Figure
CP-45/55 Operation Process
Fig. 01
^ Test Pickup -> Step
(Place Program Setting)
v
Step (Place Program Setting)
^ Reference (Reference Setting)
^ X, Y, Z, R Teaching
(Individual Place Coordinate
Teaching)
^ Part / Feeder/NZ/HD/ Cycle
Constitution
^Cycle Check
^ Save (Program Save)
^ Step Check, To Production
1.2-3)Production
v
Finish / PCB Data Down Loading
v
Start -> Start(OP Box)
v
Production
2. File (New File Create)
Select New on File Menu to create
the new file.
- Fig. 01 File Command and
Sub-menu