CP45-英文版培训教材.pdf - 第157页
Operating Manual Reference Figure CP-45/55 Operation Process # Lubricating Method Check for the lubrication interval. @Do not apply the grease mixed with other greases. @Apply grease through Grease Nipple with the Grease…
Operating Manual Reference Figure
CP-45/55 Operation Process
# GREASE Specification
@System : Lithium Soap, High Load
(Industrial Use), Lithium Complex,
Non-leaded
@Consistency : 265-295 (NLGI 2Class),
@Operating Temperature :
-15 / +150
o
C(Dropping Point 255
o
C)
@Purchasing & Contact : KiHEUNG
Co., Ltd.
(KANTO KASEI Branch located in
Busan (T.82-51-808-3549))
Purchasable in 15kg Unit
# Application Method
Apply or lubricate the grease 1 time
every 100km of running distance.
@1 time lubrication and application
every 1~2 weeks
(Operating Condition for 24 hours a
day)
@1 time lubrication and application
a month.
(Operating Condition for 10 hours
aday)
Large
Group
Small Group Lubrication Type
Lubrication
Method
Lubricatio
n Interval
Head
L/M Guide RE-Lubrication SET MNW Lubricating 4Months
Ball Spline
ALVANIA EP GREASE 2
(SHELL)
Applying 3Months
X-axis
L/M Guide Grease(EP2) Applying 1Month
Ball Screw Grease(EP2) Applying 1Month
Y-axis
L/M Guide
Grease(EP2) Lubricating 3Months
Grease(EP2) Applying 1Month
Ball Screw
Grease(EP2) Lubricating 3Months
Grease(EP2) Applying 1Month
PCB
Feeder
Lead Screw Grease(EP2) Applying 2Months
L/M Guide Rail Grease(EP2) Applying 6Months
Grease(EP2): Lithium Soap Grease No.2
1.1.2 General Lubrication
Operating Manual Reference Figure
CP-45/55 Operation Process
# Lubricating Method
Check for the lubrication interval.
@Do not apply the grease mixed with
other greases.
@Apply grease through Grease Nipple
with the Grease Gun.
(Recommended Grease Applying
Quantity : 5g/1 time for one block)
@Grease can not be lubricated to
Ball rolling part when LM Block stops.
Thus, lubricate it by moving the
Gantry slowly. (Y-axis)
@Check the lubricated condition of
grease by the low-speed operation
with Teaching Box.
@Warm up the system for 1 minute
for ensuring the suitable distribution
of grease.
# Applying Method
Apply the grease thinly to the entire
surface of a rail or a slot of screw
with a brush after removing dust or
foreign materials with dust-proof cloth.
Then, remove the surplus grease on
both ends of rail or screw by moving
slowly the relevant axis 2~3 times.
