CP45-英文版培训教材.pdf - 第172页

Operating Manual Reference Figure CP-45/55 Operation Process 1.2.2.4 Y-Axis Ball Screw *Check Points* @Check the screw for dust particles, or stain s, etc. @If the screw is dried too much, excessive noise may occur. Chec…

100%1 / 208
Operating Manual Reference Figure
CP-45/55 Operation Process
1.2.2.3 X-Axis Ball Screw
*Check Points*
@Check the screw for dust particles,
or stains, etc.
@If the screw is dried too much,
excessive noise may occur. Check
the lubrication conditions.
*Actions to be taken*
@Clean out the dust particles, foreign
materials, etc. and, if required,
apply the grease to a slot of
screw.
@Refer to an Article 1.1.2 General
Lubrication for applying method.
Operating Manual Reference Figure
CP-45/55 Operation Process
1.2.2.4 Y-Axis Ball Screw
*Check Points*
@Check the screw for dust particles,
or stains, etc.
@If the screw is dried too much,
excessive noise may occur. Check
the lubrication conditions.
*Actions to be taken*
@Clean out the dust particles, foreign
materials, etc. and, if required,
apply the grease to the screw.
@Apply the grease through the
grease nipple.
@Refer to an Article 1.1.2 General
Lubrication for applying method.
XFrame
Y-Axis Ball
Screw Opening
1.2.2.5 X,Y Axes Coupling
*Check Points*
@Check the coupling for the
tightening force.
*Actions to be taken*
@Tighten the coupling tightening bolt.
Fig. 110. Y Axis Ball Screw Opening
Operating Manual Reference Figure
CP-45/55 Operation Process
1.2.3 Conveyor System
1.2.3.1 PCB Conveyor Belt
*Check Points*
@Check the belt for a proper tension.
@Check the belt for improper wear.
@Check the drive motor pulley for
improper wear.
@Check the support idler for improper
wear.
@Check that the belt is moved to
the side or slid and missed during
operation.
*Actions to be taken*
@If a tension of the belt is loosened,
adjust the tension by use of the
support idler.
@When some problems occur to
PCB conveyance caused that a
tension of the belt is loosened,
Contact our designated C/S
company to replace the part.
Support Idler
Fig. 1-11. PCB Conveyor Belt