CP45-英文版培训教材.pdf - 第208页
Q&A CP-45/55 Operation Process
A little vibration caused by manufacturing deviation of the
gear may be occurred as shown in the right monitor screen.
If the vibration range is allowable, secure the ratchet pawl
with "screwdriver" and tighten the ratchet pawl with the right
box wrench. Then lock the push pawl with 1 T-wrench so
that it can not be moved and tighten it by turning 2 lever to
clockwise as shown in the right figure.
Step7 : Repetition Pitch Checking Step
A little vibration caused by manufacturing deviation of the
gear may be occurred as shown in the right monitor screen.
If the vibration range is allowable, secure the ratchet pawl
with "screwdriver" and tighten the ratchet pawl with the right
box wrench. Then lock the push pawl with 1 T-wrench so
that it can not be moved and tighten it by turning 2 lever to
clockwise as shown in the right figure.
NOTICE : "Counter pitch phenomenon", feeding pitch moves by
2mm respectively when carrying out the feeding test
after completing the adjustment, may occur
sometimes. This phenomenon means that the initial
position of the push pawl exceeds too much the
initial condition as shown in the right figure. Thus,
adjust the contact angle of the tail part of the
pusher pawl and the cam shaft to 0~5
o
as shown
in the right figure and then repeat step 3)~7).
CP-45/55 Operation Process
* Hardware initialize (Initialization /Motor Alarm/Head
Impossible… )
* Vision (Part Acknowledge Error, Pick Up Error… )
Trouble Shooting
Guide
CP-45/55 Operation Process
Q&A
CP-45/55 Operation Process