CP45-英文版培训教材.pdf - 第47页

Operating Manual MODEL Reference Figure CP-45/55 Operation Process Fig. 01. Screen of Array PCB Offset 1st Point Teach Fig. 02. Screen of Array PCB Offset 2nd Point Teach -> <Teach> Button This button is to teac…

Operating Manual

MODEL

Reference Figure

CP-45/55 Operation Process

-> <Number> Edit Box Area

ToenterthenumberofArrayPCB

as follows. (X:3, Y:2)

-> <Count Direction> Option Button Area

To select the counting method of

Array PCB Number. (Give a priority

to X Direction)

-> <Offset> Edit Box Area

This value is to automatically set

the offset value of Array PCB Origin.

Enter the moving offset of the basic

board and X and Y axes boards.

Operating Manual

MODEL

Reference Figure

CP-45/55 Operation Process

Fig. 01. Screen of Array PCB Offset 1st Point Teach

Fig. 02. Screen of Array PCB Offset 2nd Point Teach

-> <Teach> Button

This button is to teach the Array

PCB offset value with the teaching

method identical to that of PCB size.

If you click this button, the

following screens will be displayed

in sequence.

Teach the 1st origin point of Array

PCB. If you press the "Enter" Key

after teaching, a screen as shown

in Fig. 2 will be displayed. Teach

the origin point on position allowing

to determine the offset.

After teaching, if you press the

"Enter" key, the following screen

(Fig. 3) will be displayed.

If you press the “Enter” key,

teaching work of Array PCB Offset

Value will be finished.

Operating Manual

MODEL

Reference Figure

CP-45/55 Operation Process

Fig. 03. Screen of Array PCB Offset Teach Finished

-> <Apply> Button

To create the Array PCB Data

automatically with the values set in

this area.

<1.Array>

Move the setup position with the

Move Camera to check for its

correct position.