CP45-英文版培训教材.pdf - 第196页
Operating Manual Reference Figure CP-45/55 Operation Process 3.2.3 Difference of Clamp Types Lock type by spring Toggle type and spring type by link structure -. As the lock type by one point contact, it has weak structu…
Operating Manual Reference Figure
CP-45/55 Operation Process
3.2.2 Difference of Feeder "Z Axis"
Control
1
1
*Problems : "Z Axis" set at the work
site can be deformed if temporary or
continuous shock occurs to No. 1
area of tape guide.
*-. It is structured in a manner that
post is put up on the main frame to
support the tape guide and drawn by
the locker.
"Z Axis" height is determined by tape guide.
"Z Axis" height is determined by main frame.
Operating Manual Reference Figure
CP-45/55 Operation Process
3.2.3 Difference of Clamp Types
Lock type by spring
Toggle type and spring type by
link structure
-. As the lock type by one point
contact, it has weak structure
against vibration since it depends
upon only a spring.
-. This is locked with a toggle type
of the link structure and utilize a
spring as an auxiliary function.
It is structured strongly against
the vibration.
Operating Manual Reference Figure
CP-45/55 Operation Process
3.2.4
Waste Vinyl Treatment Structure &
Other Differences
1) Forming Gear
2) Drain Gear
3) Duct
1) Forming Gear
2) Drain Gear
4) Handle
3) Take up Reel ass'y
1) Only vinyl drain
structure by
combination of
No.3 part
1) Waste vinyl drain
type and take up
type realized by
combination of No.1,
2 and 3 Parts
2) No.4 handle
fixedbyconsidering
customer's
convenience and
safety.
3) Pocket installed for
the convenience of
part(roll)
replacement.
*Fixing a part(roll) to the Reel Post
-. Difficult to realize the Non Stop
function.
Part replacement impossible
during the system operation, if
feeder is mounted close together.
[See a Development Drawing]
* Fixing a part(roll) to the Pocket
-. Easy to realize the Non Stop
function with Splice Tool.
Part replacement possible during
the system operation, even
though a feeder is mounted
together.
[See a Development Drawing]