CP45-英文版培训教材.pdf - 第30页
Operating Manual MODEL Reference Figure CP-45/55 Operation Process Hole Fixer Edge Fixer Edge Fixer2 ^H o l ef i x e r : To insert and fix Pin into a hole of Board. Use this method when there is no Board Fiducial Mark. ^…
Operating Manual
MODEL
Reference Figure
CP-45/55 Operation Process
* Conv.Width Button:
To be used when adjusting Convey
WidthtoBoard.Clickthisbuttonto
adjust the width.
Board X, Y
Input size by measuring it in mm.
v
<X> Edit Box
To select X value of Board size.
v
<Y> Edit Box
To select Y value of Board size.
v
<Z> Edit Box
To select Z value(Thickness) of
Board size.
*d:
<8. Handling> Area
To select data required for
PCB works.
v
<Fix Type> Combo Box
To select the method for fixing
Board to work area. Select
Edge Fixer in here.
Operating Manual
MODEL
Reference Figure
CP-45/55 Operation Process
Hole Fixer
Edge Fixer
Edge Fixer2
^Holefixer
: To insert and fix Pin into a hole
of Board. Use this method when
there is no Board Fiducial Mark.
^EdgeFixer
:TopushandfixaBoardfromthe
side with a device equipped on
Conveyor. Use this method for
general Board with Fiducial Mark.
^ Edge Fixer2
: Same method as “Edge Fixer” but
push of two times.
v
<Wait Type> Combo Box
To select a wait position of Head
Block when Board Loading. Select
System in here.
-> Auto:Toselectwaitposition
to FD Mark1Position
automatically.
-> System:Towaitinpositiondefined
in System.
(System Setup / Head)
v <Move Z>
To select the min. clearance
between the top of PCB board
and the end of Head(Bottom of
Operating Manual
MODEL
Reference Figure
CP-45/55 Operation Process
Fig. 04. “Parts” Dialogue Box
Nozzle or Part in case that Nozzle
and Part are mounted) during PCB
works.
In here, 8mm refers to the 2mm
added value to height(6mm) of
Conveyor Cover based upon the top
of fixed Board.
A height refers to a distance to the
bottom when part picked up. If
height of part mounted on Board
is higher than 8mm, input 2mm
added value to the height. Operate
it as it is except a case as like this.
v PCB IN Button
Click this button to input a Board.
3.2) Part (Work Part Register)
To register work part.
3.2-1)Library Part Use
(ChipR2012 100K)
Select Part what you want in
Part Group.
^ Select Part what you want in Group.
^ Click button to copy part
information to <1.PCB Part List>.