CP45-英文版培训教材.pdf - 第114页
Operating Manual Reference Figure CP-45/55 Operation Process Click the <Remove Button> when arraying newly all of Tape Feeder by ignoring a ll of Tape Feeders arrayed which have been arrayed already. Since this but…
Operating Manual Reference Figure
CP-45/55 Operation Process
^ <Limit> Button
This is used for defining the
numbers of feeder to use by
individual part. If there is one
feeder arranged already for
certain part, AVL Column
quantity will be 2 if inputting 3
in this window and pressing the
Limit button. The Optimizer
will arrange new feeders within
the max. 2 feeders. You should
set the suitable quantities of
feeders in consideration of
the numbers of place points.
For parts having a lot of place
points, you should allocate
a lot of feeders to obtain the
good work efficiency.
^ Arrow Button(
)
This can be used when
modifying the setting to feeder
to arrange newly on the
Optimizer among the feeders
arranged already.
^ <Remove Tape> Button
Operating Manual Reference Figure
CP-45/55 Operation Process
Click the <Remove Button>
when arraying newly all of
Tape Feeder by ignoring all of
Tape Feeders arrayed which
have been arrayed already.
Since this button remains on the
bottom of Optimizer setup
screen, you can select it even
though Tape Feeder setup tap is
not shown.
* Setup Menu/Nozzle
This screen is to set the optimized
arrangement of Nozzle. All nozzles
registered to the system are shown
in <Arranged>, <Available> and
<Prohibited> list boxes, and the
sums of numbers of individual
nozzle shown in every List Box are
identical to numbers of all heads.
(6 for CP-45)
You can set the nozzle numbers as
much as what you want to arrange
it on the Optimizer by adjusting the
numbers in <Available> List Box.
Operating Manual Reference Figure
CP-45/55 Operation Process
^<Nozzle> Area/<Arranged>
List Box
An user can directly arrange
the nozzle on ANC pocket in
ANC Setup Dialogue. The
nozzles arranged already as
like this will be shown in
<Arranged> List Box as much
as the numbers arranged.
The nozzle listed in the box
can be used for the work,
however, can not be arranged
in the pocket optionally by
Optimizer. If you want to
re-arrange the nozzle arranged
already, select the desirable
nozzle, press the arrow button
(
) and then move it to the
<Available> List Box.
If an user want to directly
arrange again the nozzle,
pop-up the ANC Setup Dialogue
and assign the pocket.