CP45-英文版培训教材.pdf - 第45页

Operating Manual MODEL Reference Figure CP-45/55 Operation Process V <Array… > Button Now we will register PCBs more than one, i.g. boards are arrayed with total 9 boards of X:3 and Y:3. If you click this button, D…

100%1 / 208
Operating Manual
MODEL
Reference Figure
CP-45/55 Operation Process
2. PCB Edit (1)
This defines Data related to name
and size of a Board, place origin and
Array Board.
2.1)
Board
2.1-1)
Board Definition
Customer Name / Board Name /
Coordinate/ Board Size. Apply same
method as PCB Edit (1).
<5. Place Origin> Area
To set the place origin of Board.
This origin refers to offset from
PCB Origin of System to place origin
of PCB Board. This is to set
the reference point of Board to work
in accordance with coordinates
selected. In general a pattern close
to Stopper will be set.
Define it with position where is
identified easily within Board.
V
<Origin X> Edit Box
To set the Place Origin X value of
PCB Board.
V
<Origin Y> Edit Box
To set the Place Origin Y value of
PCB Board.
To teach the place origin with
the device selected, click <Origin X>
or <Origin Y) and then click "Move"
"Get" button on <8. Teach> Area.
Operating Manual
MODEL
Reference Figure
CP-45/55 Operation Process
V
<Array…> Button
Now we will register PCBs more
than one, i.g. boards are arrayed
with total 9 boards of X:3 and Y:3.
If you click this button, Dialogue
Box as shown in the right will be
displayed.
^ <1. Array> Area
^ To set the offset value of Array
PCB Origin for "Place Origin" of
PCB Board. Check that reference
points by each board are identical.
^ <2. Teach> Area
To move Device XY, R drive shaft
to the defined position or to obtain
the current position of XY, R drive
shaft.
^ <4. Set Array (Regular Type)>Area
To setup the Array PCB.
Offset value of individual Array
PCB will be set automatically by
this function when the place
condition of Array PCB is regular.
Operating Manual
MODEL
Reference Figure
CP-45/55 Operation Process
-> <Number> Edit Box Area
ToenterthenumberofArrayPCB
as follows. (X:3, Y:2)
-> <Count Direction> Option Button Area
To select the counting method of
Array PCB Number. (Give a priority
to X Direction)
-> <Offset> Edit Box Area
This value is to automatically set
the offset value of Array PCB Origin.
Enter the moving offset of the basic
board and X and Y axes boards.