CP45-英文版培训教材.pdf - 第71页

Operating Manual MODEL Reference Figure CP-45/55 Operation Process a b # <Test> Button Execute the Align Test. Test a part acknowledgement w ith the set Align Data. If the Te st is completed successf ully, the Mess…

Operating Manual

MODEL

Reference Figure

CP-45/55 Operation Process

# Pick the nozzle and the part

on the Head manually by using

the <Move..> button on the right

of a screen.

Operating Manual

MODEL

Reference Figure

CP-45/55 Operation Process

# <Test> Button

Execute the Align Test.

Test a part acknowledgement with

the set Align Data. If the Test

is completed successfully, the

Message Box as like a be shown,

and if the test is failed, the

Message Box as like b will be

shown.

Operating Manual

MODEL

Reference Figure

CP-45/55 Operation Process

# Set the light by clicking

the <Light Control> button.

# <Auto Teach> Button

This calculates automatically the

Align Data of part. If Auto Teach

completed successfully, "Good"

will be displayed on <Result>

area. Auto Teach is supported

only for SOP, QFP and PLCC.

Save the Align Data calculated

by Auto Teach by clicking the

<Update> Button and close the

Message Box.