SiplaceX4_en.pdf - 第456页
1 - 24 S tudent Guide SIPLACE X 9 Component handling Edition 09/2005 24 9.3.8 4 Pick up positi ons 8mm X- Feeder Fig. 9.3 - 8 Pick up positions 8mm X- Feeder – Comp. in 2 mm step in the reel are picked fro m Pos. 1. (e.g…
1 - 23
Student Guide SIPLACE X
Edition 09/2005 9 Component handling
23
9.3.6 Contactless Power- and Data- Interface
Fig. 9.3 - 6 Contactless Interface
– The power is transfer via induction
– The data is transfer via infrared and fiberoptic technology
9.3.7 Adjustable steps on the X- feeder
Fig. 9.3 - 7 Adjustable steps on X- Feeder
SIPLACE
X-Serie
Feeder
Feeder
Feeder
Feeder
Feeder
Feeder
FCU
CAN
component table
Power Data
Power Data
contactless power and
data transfere!
8mm X Feeder
1, 2, 4 and 8mm
12mm X Feeder
4, 8, 12 and 16mm
16mm X Feeder
4, 8, 12, 16 and 20mm
24mm X Feeder
4, 8, 12, 16, 20, 24, 28 and 32mm
32mm X Feeder
4, 8, 12, 16, 20, 24, 28, 32, 36 and 40mm
44mm X Feeder
4, 8, 12, 16, 20, 24, 28, 32, 36, 40, 44, 48 and 52mm
56mm X Feeder
4, 8, 12, 16, 20, 24, 28, 32, 36, 40, 44, 48, 52 and 64mm
72mm X Feeder
4, 8, 12, 16, 20, 24, 28, 32, 36, 40, 44, 48, 52, 56, 60, 64, 68, 72, 76 and 80mm
88mm X Feeder
4, 8, 12, 16, 20, 24, 28, 32, 36, 40, 44, 48, 52, 56, 60, 64, 68, 72, 76, 80, 84, 88, 92 and 96mm
1 - 24
Student Guide SIPLACE X
9 Component handling Edition 09/2005
24
9.3.8 4 Pick up positions 8mm X- Feeder
Fig. 9.3 - 8 Pick up positions 8mm X- Feeder
– Comp. in 2 mm step in the reel are picked from Pos. 1. (e.g.0201, 0402)
– Comp. in 4 mm step and cross (short comp. width W) in the reel are picked from Pos. 2.
(e.g. 0603, 0805, Micro-,Mini-Melf)
– Comp. in 4 mm step and along (long s. SOT23) in the reel are picked from Pos. 3.
(e.g. 1206, SOT23)
– Special-comp. in 8 mm step in the reel are picked from Pos. 4.
9.3.9 3 Pick up positions 12mm X- Feeder
Fig. 9.3 - 9 Pick up positions 12mm X- Feeder
Comp. with comp.width W up to 3mm (in feed direction) are picked from Pos. 1.
Comp. with comp.width W from 3 mm up to 7mm (in feed direction) are picked from Pos. 2.
Comp. with comp.width W from 7mm up to 11.5 mm (in feed direction) are picked from Pos. 3
9.3.10 One pick up position in all other X- Feeder
Fig. 9.3 - 10 Pick up position for other X- Feeder
4mm
z.B. 16mm
4mm
z.B. 16mm
1 - 25
Student Guide SIPLACE X
Edition 09/2005 9 Component handling
25
9.3.11 X- Feeder operator panel
Fig. 9.3 - 11 X- Feeder operator panel
1. Operator panel X- Feeder 2. LCD- Display (In the basic view shows
the display the track number and the
step)
3. Button "Forward" 4. Button "Backward"
5. Button "FOIL" 6. Button "SET"
7. Status LED:
– green ---> ready, and the feeder is
used in the current set up
– orange ---> Warning
– red ---> Error
– Display Off ---> Feeder isn‘t use in the
current set up