SiplaceX4_en.pdf - 第613页

1 - 46 S tudent Guide SIPLACE X 13 MTC 2 Edition 09/2005 46 13.3.2.3 Machine dat a MTC Fig. 13.3 - 12 Storage machine data Save Machine-Data: With the SW 601, it is not possible to save the data onto the floppy disc. Now…

100%1 / 670
1 - 45
Student Guide SIPLACE X
Edition 09/2005 13 MTC 2
45
Fig. 13.3 - 11 Overview "Calibration feed axes 2/2"
Catch
Engage
The catch is engaged in the waffle pack
tray carrier. This allows a waffle pack tray
carrier to be moved out of the tower.
Disengage
The catch is then disengaged, so that the
tower can be moved.
Apply
Applies the taught position. A reference
run is then started.
Opens the Teach removal
position dialog box where you can
select the cassette for which the
removal position is to be taught.
Select the cassette
for which the removal
position is to be
determined.
After selecting the cassette the saved
removal position is approached and
the Teach removal position dialog
box is opened which allows you
engage or disengage the catch.
1 - 46
Student Guide SIPLACE X
13 MTC 2 Edition 09/2005
46
13.3.2.3 Machine data MTC
Fig. 13.3 - 12 Storage machine data
Save Machine-Data: With the SW 601, it is not possible to save the data onto the floppy disc.
Now you can choose a folder and save the mtc.ma (e.g. Memory Stick)
Calls the view for the functions
of the MTC.
Calls the view for the tower
functions of the MTC.
Calls the view for the axis
functions of the MTC.
Calls the view for the settings of
the MTC.
Calls the view for the machine
data functions of the MTC.
Calls the view for the inputs/
outputs of the MTC.
Calls the view for the inputs/
outputs of the MTC.
Return to the main view.
Selects the MTC
at location 2 or 4.
The file mtc.ma, which contains the machine
data for the MTC, is copied from floppy disk
to the directory C:\SRDaten\srcma of the
station computer. The machine data is then
transferred to the MTC.
This saves the changes to the machine data
of the MTC in a file called mtc.ma which is
located in the directory C:\SRDaten\srcma
of the station computer. The file mtc.ma is
subsequently copied to floppy disk.
MTC serial number
Enter the serial number
of the MTC here.
The serial number can
be found on the MTC.
Info
MTC serial number
The serial number of the MTC is
displayed here.
MTC machine data
The current status of the MTC
machine data is shown here, the value
may be "Changed" or "Not changed".
1 - 47
Student Guide SIPLACE X
Edition 09/2005 13 MTC 2
47
13.3.3 Adjustments Lifting Axes
Fig. 13.3 - 13 Overview of the lifting axes
Key
1 Lifting axis tower 1
2 Lifting axis tower 2
3 Servo motors of the lifting axes
4 Dual toothed belt (shown here for tower 2)
5 Spindle (shown here for tower 2)
6 Inductive sensors (shown here for tower 2)
7 Holes for the measurement head of the belt frequency measuring device
3
2