SiplaceX4_en.pdf - 第575页

1 - 8 S tudent Guide SIPLACE X 13 MTC 2 Edition 09/2005 8 Fig. 13.1 - 5 Location of the warni ng labels on the MTC 2 (left-hand side) Key 1s e e Abb. 13.1 - 6 7s e e Abb. 13.1 - 12 2s e e Abb. 13.1 - 7 8s e e Abb. 13.1 -…

100%1 / 670
1 - 7
Student Guide SIPLACE X
Edition 09/2005 13 MTC 2
7
13.1.5 Safety information
13.1.5.1 Warning and information labels on the MTC 2
CAUTION
The following pages contain only the most important safety information. Please observe the safety
instructions detailed in the current operating instructions.
Fig. 13.1 - 4 Location of the warning labels on the MTC 2 (right-hand side)
Key
1see Abb. 13.1 - 6 7see Abb. 13.1 - 12
2see Abb. 13.1 - 7 8see Abb. 13.1 - 13
3see Abb. 13.1 - 8 9see Abb. 13.1 - 14
4see Abb. 13.1 - 9 10 see Abb. 13.1 - 15
5see Abb. 13.1 - 10 11 see Abb. 13.1 - 16
6see Abb. 13.1 - 11
1
5
7
8
11
2
6
3
10
5
1 - 8
Student Guide SIPLACE X
13 MTC 2 Edition 09/2005
8
Fig. 13.1 - 5 Location of the warning labels on the MTC 2 (left-hand side)
Key
1see Abb. 13.1 - 6 7see Abb. 13.1 - 12
2see Abb. 13.1 - 7 8see Abb. 13.1 - 13
3see Abb. 13.1 - 8 9see Abb. 13.1 - 14
4see Abb. 13.1 - 9 10 see Abb. 13.1 - 15
5see Abb. 13.1 - 10 11 see Abb. 13.1 - 16
6see Abb. 13.1 - 11
8
4
2
2
4
5
5
5
10
9
3
1 - 9
Student Guide SIPLACE X
Edition 09/2005 13 MTC 2
9
Fig. 13.1 - 6 Information label below the main switch
Fig. 13.1 - 7 Warning labels on the enclosures around the electric parts
Fig. 13.1 - 8 Warning label by the lifting axis motors
Read the Operating Instructions before
using the MTC for the first time.
Operation of the MTC is only permitted
when attached to a SIPLACE machine
and if the lifting axis guard is fitted.
Before detaching the MTC:
• Ensure that there is no set-up on the
MTC and move to transport position
• Push placement head away from the
feed area of the MTC
Transporting the MTC:
• Use a suitable pallet jack or fork lift
to transport the MTC long distances
• Set adjustable forks to the outer width of
the guide rails
• Stand the MTC on its rollers only when
not attached to the SIPLACE machine
Caution!
Disconnect the
power supply cord
before opening
housing!
Caution!
Operation is only
permittedwhenthe
guard is fitted.