00195741-0102_UM_D1_D2_SR605_EN.pdf - 第182页
3 Technical data for the machine User Manual SIPLACE D1/D2 3.11 Component trolley From software version SR.605.xx 07/2008 EN Edition 182 3.1 1.8 Feeder module fixing Item no. 001 19623-xx Feeder module fixing, SIPLACE HF…
User Manual SIPLACE D1/D2 3 Technical data for the machine
From software version SR.605.xx 07/2008 EN Edition 3.11 Component trolley
181
3.11.7.4 Adapter plate assembly position for 950 mm PCB conveyor height
PLEASE NOTE
The procedure for setting the height of the component trolley is described in Section 4.4
, from
page 216.
3
Fig. 3.11 - 10 Adapter plate assembly position for 950 mm PCB conveyor height
(1) Adapter plate
(2) Hexagon socket head screw, M6x20 with washer, 4 x
3 Technical data for the machine User Manual SIPLACE D1/D2
3.11 Component trolley From software version SR.605.xx 07/2008 EN Edition
182
3.11.8 Feeder module fixing
Item no. 00119623-xx Feeder module fixing, SIPLACE HF/X/D1/D2/D3
The feeder module fixing is an additional mechanical locking device. It prevents the feeder mod-
ules accidentally moving on the component table and thus prevents the risk of collision with the
placement head.
The feeder module fixing is fixed to the front panel of the component table using screws. The claws
fix the feeder module feet. One feeder module fixing is needed for each component trolley.
3
Fig. 3.11 - 11 Feeder module fixing
(1) Feeder module fixing
(2) Component table
User Manual SIPLACE D1/D2 3 Technical data for the machine
From software version SR.605.xx 07/2008 EN Edition 3.11 Component trolley
183
3.11.9 Used tape chute
3
Fig. 3.11 - 12 Used tape chute
The used tape chute is attached to the tape cutter. The waste tape that is chopped up by the tape
cutter slides onto the used tape chute and into the waste container of the component trolley.