00195741-0102_UM_D1_D2_SR605_EN.pdf - 第64页
2 Operational safety User Manual SIPLACE D1/D2 2.5 Safety instructions for operating the machine From software version SR.605.xx 07/2008 EN Edition 64 2.5.9 Safety instructions for manual ly moving the Z axis at the P&am…
User Manual SIPLACE D1/D2 2 Operational safety
From software version SR.605.xx 07/2008 EN Edition 2.5 Safety instructions for operating the machine
63
2.5.7 Safety instructions for removing nozzles from Collect&Place heads
CAUTION
RISK OF INJURY TO FINGERS BY SHARP NOZZLES 2
Do not remove the nozzles in the pick-up/placement position (item 2 and 4 in Fig. 2.5 - 4).
The procedure for removing nozzles manually from the sleeve is as follows:
→ Pace the sleeve from which the nozzle is to be removed to the removal point (item 1 and 3 in
Fig. 2.5 - 4
).
→ Remove the nozzle from the sleeve here.
2
Fig. 2.5 - 4 Position of the sleeve during a manual nozzle change
(1) Removal position for sleeves and nozzles, C&P12
(2) Pick-up and placement position, C&P12
(3) Removal position for sleeves and nozzles, C&P6
(4) Pick-up and placement position, C&P6
2.5.8 Note on the ESD safety of the machines
→ Only use nozzles that are identified as conductive. This is the only way to meet the require-
ments for the ESD safety of the machine.
2 Operational safety User Manual SIPLACE D1/D2
2.5 Safety instructions for operating the machine From software version SR.605.xx 07/2008 EN Edition
64
2.5.9 Safety instructions for manually moving the Z axis at the P&P head
CAUTION
RISK OF CRUSHING AT THE P&P HEAD 2
NEVER move the Z axis down with your hand at the buffer of the return unit. The powerful spring
force of the cylinder creates a risk of injury to your fingers due to the buffer springing back. The
same applies inside the TwinHead when the piston rod springs back into its starting position.
2
Fig. 2.5 - 5 Risk of crushing from the return unit on the P&P head
(1) Return unit, compressed air cylinder
(2) Piston rod
(3) Buffer of the return unit
(A) Risk of crushing to fingers
User Manual SIPLACE D1/D2 2 Operational safety
From software version SR.605.xx 07/2008 EN Edition 2.5 Safety instructions for operating the machine
65
2.5.10 Safety instructions for the tape cutter
2
Fig. 2.5 - 6 Safety instructions for the tape cutter
WARNING RISK OF CUTTING! 2
→ Never reach down into the used tape channel (Pos. 1 in Fig. 2.5 - 6
) from above with bare
hands, even if the machine is switched off.
→ Similarly, even when the machine is switched off, do not reach up from below with bare hands
into the ejection opening of the tape cutter (Pos. 2 in Fig. 2.5 - 6
), e.g. to remove waste used
tape.
→ To remove waste used tape, it is essential to switch the machine off first and put on very sub-
stantial protective gloves, as the tape cutter bars are extremely sharp.