00195741-0102_UM_D1_D2_SR605_EN.pdf - 第270页
6 Station extensions User Manual SIPLACE D1/D2 6.1 Nozzle changer From software version SR.605.xx 07/2008 EN Edition 270 6.1.2.2 T echnical dat a 6 6.1.2.3 Position of the nozzle changers for t he C&P6 head D1 placem…
User Manual SIPLACE D1/D2 6 Station extensions
From software version SR.605.xx 07/2008 EN Edition 6.1 Nozzle changer
269
6.1.2 Nozzle changer for the 6-segment Collect&Place head
Item no. 00119866-xx Nozzle changer, 6-segment Collect&Place head, D1/D2
6.1.2.1 Description
This nozzle changer can hold up to 4 magazines, each with 6 nozzle holders. There are two types
of magazine available: magazines for type 8xx nozzles and magazines for type 9xx nozzles. The
magazines are seated on a common support. They are centered using two parallel pins and fixed
in place with clips.
Standard configuration: 3 magazines for type 9xx nozzles
1 magazine for type 8xx nozzles
6
Fig. 6.1 - 7 Nozzle changer for the 6-segment Collect&Place head
(1) Magazine for type 9xx nozzles
(2) Magazine for type 8xx nozzles
WARNING 6
→ Only install the associated nozzle changer for each placement head. There is a risk of head
crashes with mixed configurations.
6 Station extensions User Manual SIPLACE D1/D2
6.1 Nozzle changer From software version SR.605.xx 07/2008 EN Edition
270
6.1.2.2 Technical data
6
6.1.2.3 Position of the nozzle changers for the C&P6 head
D1 placement machine 6
One nozzle changer for the 6-segment Collect&Place head may be installed at location 2. It is set
up in place of the nozzle changer for the 12-segment Collect&Place head (item 1 in Fig. 6.1 - 2
,
page 263
). This gives a total capacity of 4 magazines with a total of 24 nozzle holders.
D2 placement machine 6
A nozzle changer for the 6-segment Collect&Place head may be installed at locations 1 and 2. It
is set up in place of the nozzle changer for the 12-segment Collect&Place head (item 1 in Fig. 6.1
- 3, page 264). This gives a total capacity of 2 nozzle changers with 8 magazines and a total of 48
nozzle holders.
Nozzle changer for the 6-segment Collect&Place head
Dimensions (length x width x height) 565 x 69 x 87 mm³
Number of magazines 4, each with 6 nozzle holders
Nozzle types 8xx, 9xx
Nozzle changeover time approx. 2s per nozzle
Compressed air connection 0.48 MPa (4.8 bar)
User Manual SIPLACE D1/D2 6 Station extensions
From software version SR.605.xx 07/2008 EN Edition 6.1 Nozzle changer
271
6.1.2.4 Assembly
Each nozzle changer is fixed to the used tape channel (see Fig. 6.1 - 2 and 6.1 - 3, from page 263).
→ Align the nozzle changer so that the moving spring hooks always point toward the operator,
while the retaining clamps always point toward the PCB conveyor.
6
Fig. 6.1 - 8 Assembly positions
(1) Spring hook pointing toward the operator
(2) Retaining clamp pointing toward the PCB conveyor
(3) magazine for type 8xx nozzles
(4) magazine for type 9xx nozzles
6.1.2.5 Notes on operation
→ The magazines can be filled with different nozzle types within a nozzle family: 8x magazine,
for example, with nozzle types 821, 822, 823, 9x magazine with types 911, 914, etc.
PLEASE NOTE 6
Fill the magazines off the machine and always replace complete magazines. 6
→ Open the locking plate and place the nozzles in the nozzle holders.
→ Close the locking plate so that the nozzles cannot drop out of the magazines.