00195741-0102_UM_D1_D2_SR605_EN.pdf - 第266页

6 Station extensions User Manual SIPLACE D1/D2 6.1 Nozzle changer From software version SR.605.xx 07/2008 EN Edition 266 CAUTION 6 Before you fill magazine, make sure that all the nozzles on the Collect&Place head ha…

100%1 / 334
User Manual SIPLACE D1/D2 6 Station extensions
From software version SR.605.xx 07/2008 EN Edition 6.1 Nozzle changer
265
6.1.1.5 Assembly
Each nozzle changer (see Fig. 6.1 - 2, page 263) is fixed to the used tape channel.
6
Fig. 6.1 - 4 Assembly position
(1) Spring hook pointing toward the operator
(2) Retaining clamp pointing toward the PCB conveyor
→ Align the nozzle changer so that the moving spring hooks always point toward the operator,
while the retaining clamps always point toward the PCB conveyor.
6.1.1.6 Notes on operation
→ When you fill a magazine with a certain nozzle type for the first time, attach an adhesive label
to identify the type.
PLEASE NOTE 6
Fill the magazines off the machine and always replace complete magazines. 6
→ Open the locking plate and place the nozzles in the nozzle holders.
→ Close the locking plate so that the nozzles cannot drop out of the magazines.
6 Station extensions User Manual SIPLACE D1/D2
6.1 Nozzle changer From software version SR.605.xx 07/2008 EN Edition
266
CAUTION 6
Before you fill magazine, make sure that all the nozzles on the Collect&Place head have been
returned to their magazines. 6
→ Programming the nozzle changer is described in the SIPLACE Pro user manual.
PLEASE NOTE 6
→ Do not allow components to drop onto the magazines. If they do, they could jam the locking
plate.
→ Do not allow components to drop onto free feeder module locations. They will stick to the
magnetic bar. Production may have to be interrupted if the feeder modules are not placed on
the component table correctly. You should therefore regularly clean the magazines and free
locations.
6
6
6
User Manual SIPLACE D1/D2 6 Station extensions
From software version SR.605.xx 07/2008 EN Edition 6.1 Nozzle changer
267
6.1.1.7 Changing the magazine
→ To remove the magazine, push the spring hook (item 1 in Fig. 6.1 - 5, page 267) away from
the magazine. Lift the magazine out of the carrier.
6
Fig. 6.1 - 5 Changing the magazine
(1) Spring hook
(2) Retaining clamp
(3) Centering hole
(4) Slot
(5) Parallel pin of the slide mechanism
(6) Hole for the parallel pin of the slide mechanism
(A) Push the spring hook away from the magazine
6
6