00195741-0102_UM_D1_D2_SR605_EN.pdf - 第184页
3 Technical data for the machine User Manual SIPLACE D1/D2 3.11 Component trolley From software version SR.605.xx 07/2008 EN Edition 184 3.1 1.10 U sed t ape channel In the standa rd version, the used t ape ch annel can …
User Manual SIPLACE D1/D2 3 Technical data for the machine
From software version SR.605.xx 07/2008 EN Edition 3.11 Component trolley
183
3.11.9 Used tape chute
3
Fig. 3.11 - 12 Used tape chute
The used tape chute is attached to the tape cutter. The waste tape that is chopped up by the tape
cutter slides onto the used tape chute and into the waste container of the component trolley.
3 Technical data for the machine User Manual SIPLACE D1/D2
3.11 Component trolley From software version SR.605.xx 07/2008 EN Edition
184
3.11.10 Used tape channel
In the standard version, the used tape channel can guide component tapes with a maximum
pocket height of 17 mm to the pneumatic tape cutter.
3
Fig. 3.11 - 13 Used tape channel with component reject bin
(1) Inlet slot for the used tapes
(2) Outlet slot for the used tape above the pneumatic tape cutter
(3) Dividing plate for tapes < 17 mm (can be removed for tapes > 17 mm)
PLEASE NOTE
– The separating plate (item 3 in Fig. 3.11 - 13
) can be removed for tape pockets higher than
17 mm (see Section 4.5
, page 227).
→ Do not position feeder modules with shallow pockets immediately beside feeder modules with
deep pockets. The used tapes could overlap and build up.
User Manual SIPLACE D1/D2 4 Setting up and commissioning
From software version SR.605.xx 07/2008 EN Edition 4.1 Transport and delivery configuration
185
4 Setting up and commissioning
4.1 Transport and delivery configuration
4.1.1 Shipping packaging
Within Europe, the machine and the CO trolleys are supplied on two pallets and wrapped in plastic
film. They will be dispatched overseas in two robust wooden crates.
4.1.1.1 Dimensions of the shipping packaging
4
4
4
Fig. 4.1 - 1 Transport crate - dimension in millimeters
(A) Fork-lift attachment points
4.1.1.2 Weight of the machine prepared for dispatch
The following table contains the weights of the machines prepared for dispatch, including packag-
ing.
4
Crate for the machine Crate for the component trolleys
Length 2570 mm 1700 mm
Width 1860 mm 1200 mm
Height 1600 mm 1300 mm
Weight Dispatch within Europe Dispatch overseas
SIPLACE D1
SIPLACE D2
2240 kg
2258 kg
2604 kg
2622 kg
CO trolley 370 kg 450 kg