00195741-0102_UM_D1_D2_SR605_EN.pdf - 第261页
User Manual SIPLACE D1/D2 6 Station extensions From software version SR.605.xx 07/2008 EN Edition 6.1 Nozzle changer 261 6 S t ation extensions 6.1 Nozzle changer Nozzle changers can greatly increase the flexibility of t…
5 Tasks for the operating personnel User Manual SIPLACE D1/D2
5.10 Docking the component trolley in or out From software version SR.605.xx 07/2008 EN Edition
260
User Manual SIPLACE D1/D2 6 Station extensions
From software version SR.605.xx 07/2008 EN Edition 6.1 Nozzle changer
261
6 Station extensions
6.1 Nozzle changer
Nozzle changers can greatly increase the flexibility of the placement heads for processing differ-
ent types of component. If the placement program requires a nozzle change, then the placement
head automatically returns the old nozzle to the nozzle holder and picks up the new nozzle. Noz-
zles that were separated out during the vacuum check can also be quickly changed.
It is significantly more exact and faster to pick up nozzles from a nozzle changer than would be
possible manually. When placing small components, it is essential to minimize the radial eccen-
tricity during nozzle rotation.
6.1.1 Nozzle changer for the 12-segment Collect&Place head
Item no. 00119865-xx Nozzle changer, 12-segment C&P head, D1/D2
6
Fig. 6.1 - 1 Nozzle changer for the 12-segment Collect&Place head
6 Station extensions User Manual SIPLACE D1/D2
6.1 Nozzle changer From software version SR.605.xx 07/2008 EN Edition
262
6.1.1.1 Description
This nozzle changer can hold up to 6 magazines, each with 12 nozzle holders. The magazines
are seated on a common support. They are centered using two parallel pins and fixed in place with
clips.
6.1.1.2 Technical data
6
Nozzle changer for the 12-segment Collect&Place head
Dimensions (length x width x height) 565 x 63 x 78 mm³
Number of magazines 6, each with 12 nozzle holders
Nozzle types 9xx
Nozzle changeover time approx. 2s per nozzle
Compressed air connection 0.48 MPa (4.8 bar)