00195741-0102_UM_D1_D2_SR605_EN.pdf - 第23页
User Manual SIPLACE D1/D2 1 Introduction From software version SR.605.xx 07/2008 EN Edition 1.1 Description of the machine 23 1.1.7 EU Declaratio n of Conformity The product/device descr ibed below 1 Product: Placement m…
1 Introduction User Manual SIPLACE D1/D2
1.1 Description of the machine From software version SR.605.xx 07/2008 EN Edition
22
1.1.6 Serial number of the machine
The serial number of the machine can be found in two different places.
– The serial number (e.g. C1) is struck on the base of the machine frame, on the same side as
the pneumatic unit (see item 1 in Fig. 1.1 - 4
).
– The serial number is also punched on the machine's rating plate (see item 2 in Fig. 1.1 - 4
).
1
Fig. 1.1 - 4 Places with the serial number on the machine
User Manual SIPLACE D1/D2 1 Introduction
From software version SR.605.xx 07/2008 EN Edition 1.1 Description of the machine
23
1.1.7 EU Declaration of Conformity
The product/device described below 1
Product: Placement machine
Type: SIPLACE D1 SIPLACE D2
Item no.: 00119800 00119850 1
manufactured by
SIPLACE
Electronics Assembly Systemsr
Rupert-Mayer-Str. 44
81379 München 1
conforms to the regulations and standards listed in the EU Declaration of Conformity provided.
1.1.8 Use as prescribed
The product must only be used for its intended purposes as described in the catalogs and techni-
cal descriptions, namely the placement of SMD components, and only with the third-party equip-
ment and components recommended or permitted by SIPLACE Company. Use for a different or
extended purpose is not prescribed.
If the product is not used as prescribed, SIPLACE Companyaccepts no liability for any damage
that may occur and does not guarantee that the components will work properly and without prob-
lems.
Use as prescribed also includes compliance with all the instructions in the user manual.
For the product to operate correctly and reliably, it must have been transported, stored, erected
and assembled correctly and must be operated and maintained with care.
1.1.9 Failure to use the product as prescribed
Failure to use the product as prescribed can result in both danger to life and limb and material
damage. For this reason any use that is not prescribed is not allowed. If the product is not used
as prescribed, SIPLACE Companyaccepts no liability for any damage that may occur and does
not guarantee that the components will work properly and without problems.
Use of the machine other than as prescribed includes, for example
– operation of the placement machine with safety equipment deactivated or removed.
– placement of components that do not meet the permitted specification.
– use of component feeder modules that have not been approved.
– use of unauthorized accessories and additional modules.
1 Introduction User Manual SIPLACE D1/D2
1.1 Description of the machine From software version SR.605.xx 07/2008 EN Edition
24
– use of the placement machine by unqualified personnel.
– operation of the placement machine without a guard ("dummy feeder") if not every location
contains a feeder.
– unclear allocation of electrical connecting cables to each machine and the installed options.
– if there are two or more people standing at a component trolley location at the same time dur-
ing the retrofit.
1.1.10 Noise emissions
1.1.11 Important notes on environmentally-friendly disposal of materials
and components
SIPLACE systems are manufactured using only materials and parts that can be easily separated
and disposed of in an environmentally-friendly way.
PLEASE NOTE 1
The owner of the system has sole responsibility for the proper environmentally-friendly disposal
of machines, working materials, consumables and wear parts.
→ Please observe your national statutory provisions for waste disposal and environmental pro-
tection.
1.1.12 Electromagnetic compatibility (EMC)
SIPLACE placement machines are designed and tested for professional use in industrial applica-
tions. Electromagnetic compatibility in terms of the emission of interference cannot be guaranteed
in any other environment.
1.1.13 Note on original SIPLACE accessories
→ Only use SIPLACE original spare parts and authorized accessories. The use of other parts
will affect safety and will invalidate the liability for any consequential damage.
Maximum noise emissions 74 dB (A)