FUJI NXT Programming Manual QD004-18.pdf
Manual Update Notice The following manual has been revised and released: Manual title: NXT Programming Manual Manual number (updated edition): QD004-18 Manual number (previ ous edition): QD004-17 Date of issue: January 2…
Manual Update Notice
The following manual has been revised and released:
Manual title: NXT Programming Manual
Manual number (updated edition): QD004-18
Manual number (previous edition): QD004-17
Date of issue: January 29, 2010
The main changes that have been made are detailed in the table below.
Note:
For a copy of the entire manual, contact your nearest Fuji sales representative or send
an e-mail request to the address below.
E-mail: intnetqst@fuji.co.jp
Chapter, Section Summary of changes
3. Job Builder
3.4.6 Using the tray unit-LT and
LTC
The explanation of the tray unit-LTC has been
added in this section.
3.4.8 Specifying the tape pitch
and indexing speed in the job
(from NXT V5.15)
This section has been newly added.
3.4.9 Adjusting placement due
to panel warp function (from
NXT V5.15)
This section has been newly added.
4. Part Data Settings
4.4.3 Package information
details
The explanation of items “Indexing Speed“
and “Assign Feeder Indexing Settings“ has
been added.
Minor changes and corrections have also
been made at various locations throughout
manual.
QD004-18
Programming Manual
NXT
Fuji Scalable Placement Platform
Original Instructions
CAUTION !
Contact Fuji or a Fuji representative before
transporting this product to a foreign location within
your company or selling it to a third party within
your country or a different country.
If this product is sold or transported to a different
country without contacting Fuji, it may not be
possible for us to supply spare parts or provide
maintenance.