FUJI NXT Programming Manual QD004-18.pdf - 第19页

QD004-18 3. Job Builder NXT Programming Manual 9 10.Enter auto backup pin data. (N XT, only for equipped machines) 11.Panelize the panel (Panel Management). 12.L ine balance the work load. (NXT) 13. Optimize the job. (NX…

100%1 / 220
3. Job Builder QD004-18
8 NXT Programming Manual
11.Panelize the panel (Panel Management).
12.Line balance the work load. (NXT)
13.Optimize the job. (NXT)
14.Generate reports. (NXT)
3.2.7 Starting by importing Mentor CAD data
Follow the roadmap below to create a basic job by importing Mentor CAD data. Generating
recipes is not necessary for the NXT unless one wants to view reports.
1. Create a job manually.
2. Import the Mentor CAD data.
3. Import the BOM file.
4. Import any existing part data into the job.
5. Create any missing part data. (NXT)
6. Import mark data into the job.
7. Perform a verify check
8. Add a line to the job.
9. Enter the machine configuration and process data. (NXT)
10.Enter auto backup pin data. (NXT, only for equipped machines)
11.Panelize the panel (Panel Management).
12.Line balance the work load. (NXT)
13.Optimize the job. (NXT)
14.Generate reports. (NXT)
3.2.8 Starting by importing CR5000 (PWS/Board Designer) CAD
data
Follow the roadmap below to create a basic job by importing CR5000 CAD data.
Generating recipes is not necessary for the NXT unless one wants to view reports.
1. Create a job manually.
2. Import the CR5000 CAD data.
3. Import the BOM file.
4. Import any existing part data into the job.
5. Create any missing part data. (NXT)
6. Import mark data into the job.
7. Perform a verify check
8. Add a line to the job.
9. Enter the machine configuration and process data. (NXT)
QD004-18 3. Job Builder
NXT Programming Manual 9
10.Enter auto backup pin data. (NXT, only for equipped machines)
11.Panelize the panel (Panel Management).
12.Line balance the work load. (NXT)
13.Optimize the job. (NXT)
14.Generate reports. (NXT)
3.2.9 Starting by importing OrCAD CAD data
Follow the roadmap below to create a basic job by importing OrCAD CAD data. Generating
recipes is not necessary for the NXT unless one wants to view reports.
1. Create a job manually.
2. Import the OrCAD CAD data.
3. Import the BOM file.
4. Import any existing part data into the job.
5. Create any missing part data. (NXT)
6. Import mark data into the job.
7. Perform a verify check
8. Add a line to the job.
9. Enter the machine configuration and process data. (NXT)
10.Enter auto backup pin data. (NXT, only for equipped machines)
11.Panelize the panel (Panel Management).
12.Line balance the work load. (NXT)
13.Optimize the job. (NXT)
14.Generate reports. (NXT)
3.2.10 Starting by importing SFX-J1 CAD data
Follow the roadmap below to create a basic job by importing SFX-J1 CAD data. Generating
recipes is not necessary for the NXT unless one wants to view reports.
1. Create a job manually.
2. Import the SFX-J1 CAD data.
3. Import the BOM file.
4. Import any existing part data into the job.
5. Create any missing part data. (NXT)
6. Import mark data into the job.
7. Perform a verify check
8. Add a line to the job.
3. Job Builder QD004-18
10 NXT Programming Manual
9. Enter the machine configuration and process data. (NXT)
10.Enter auto backup pin data. (NXT, only for equipped machines)
11.Panelize the panel (Panel Management).
12.Line balance the work load. (NXT)
13.Optimize the job. (NXT)
14.Generate reports. (NXT)
3.2.11 Starting by importing Specctra CAD data
Follow the roadmap below to create a basic job by importing Specctra CAD data.
Generating recipes is not necessary for the NXT unless one wants to view reports.
1. Create a job manually.
2. Import the Specctra CAD data.
3. Import the BOM file.
4. Import any existing part data into the job.
5. Create any missing part data. (NXT)
6. Import mark data into the job.
7. Perform a verify check
8. Add a line to the job.
9. Enter the machine configuration and process data. (NXT)
10.Enter auto backup pin data. (NXT, only for equipped machines)
11.Panelize the panel (Panel Management).
12.Line balance the work load. (NXT)
13.Optimize the job. (NXT)
14.Generate reports. (NXT)
3.2.12 Starting by importing PowerPCB CAD data
Follow the roadmap below to create a basic job by importing PowerPCB CAD data.
Generating recipes is not necessary for the NXT unless one wants to view reports.
1. Create a job manually.
2. Import the PowerPCB CAD data.
3. Import the BOM file.
4. Import any existing part data into the job.
5. Create any missing part data. (NXT)
6. Import mark data into the job.
7. Perform a verify check