FUJI NXT Programming Manual QD004-18.pdf - 第159页

QD004-18 5. Transmission NXT Programming Manual 149 6. During transmission, the [Tra nsmission Status] dialog box displays. This dialo g box displays the job and machines. The transmissi on status is displayed to the rig…

100%1 / 220
5. Transmission QD004-18
148 NXT Programming Manual
5.2 Transmitting
5.2.1 Transmitting a job from Job Builder
Follow the procedures below to transmit a currently opened global job to the NXT from
within Job Builder. Be sure to save the job before transmitting.
1. Select [Transmit] from the [Tools] menu.
Note: The currently opened job can only be transmitted to the line that is used in the job.
2. The [Transmit Options] dialog box displays. Select the desired options and click [OK].
3. Select the machine to which to transmit and click [Start].
4. In the [Lane Job Selection] dialog box, specify any changes you wish to make for the
jobs to send to the lanes and click [OK].
5. During transmission, the [Transmit] dialog box displays. This dialog box displays the
transmission status. If any errors occur, click [Error Details] to display further
information about the errors. Click [Close] to close the dialog box when transmission is
completed.
Note: The lane to which the job is transmitted is determined by the lane for which the job was
optimized for the NXT machine.
Note: The job name displays in the list of programs at the machine with the job name and a T for
the top side and B for the bottom side and the revision displays before these items.
5.2.2 Dragging and dropping jobs to transmit
Follow the procedures below to transmit a job to the NXT by dragging and dropping the job
in the Transmission Control view.
1. With the Transmission Control window displayed in Director, drag the desired job from
the global directory in the job pane and drop it on either the NXT line, machine, or lane
in the Factory/Line pane.
Note: If the job is dropped on a lane, then that line, machine, and lane are automatically selected
in the [Transmit Job] dialog box. If the job was just dropped on the NXT machine, then both
lanes for the NXT are automatically selected.
2. The [Transmit Job] dialog box displays. In [Job:], the selected job is automatically
selected. Select the side of the panel to transmit.
3. The line and machine that the job was dropped on is automatically selected. The
machines that can be transmitted to have a small panel icon to the left of the machine
nickname. The machines for which the job is not ready to be transmitted or jobs that are
from the local job directory have small panel icon with a red X across it.
Note: A job from the local job directory cannot be transmitted to any NXT machines. Only jobs
from the global job directory can be transmitted.
4. Select the lanes to which to send the job from the [Lane] drop-down list. If the job was
dropped on a lane, then that lane is automatically selected.
5. Select any desired options from the bottom of the dialog box and click [Send] to transmit.
QD004-18 5. Transmission
NXT Programming Manual 149
6. During transmission, the [Transmission Status] dialog box displays. This dialog box
displays the job and machines. The transmission status is displayed to the right of the
machine nickname. If any errors occur, click [Error Details] to display further information
about the errors. Click [Close] to close the dialog box when transmission is completed.
Note: The job name displays in the list of programs at the machine with the job name and a T for
the top side and B for the bottom side and the revision displays before these items.
5.2.3 Using [Transmit] to transmit
Follow the procedures below to transmit a job from within Director using the [Transmit]
command.
1. Select [Transmit] - [Job] - [Transmit] from the [Tools] menu in Director.
2. The [Transmit Job] dialog box displays. Next to [Job:] displays the job to be transmitted.
If a job does not display or the job is incorrect, click [Browse] to display the [Select Data]
dialog box. Select the job to transmit and click [Open]. Select the side of the panel to
transmit.
3. Select the name of the line to transmit to from the [Line:] drop-down list. When a line is
selected, the machines to which can transmitted have a small panel icon to the left of
the machine nickname. The machines for which the job is not ready to be transmitted
or jobs that are from the local job directory have small panel icon with a red X across it.
Note: A job from the local job directory cannot be transmitted to any NXT machines. Only jobs
from the global job directory can be transmitted.
4. Select the lanes to which to send the job from the [Lane] drop-down list.
5. Select the target machines for transmission. The machines with a red X across the
panel icon cannot be selected.
6. After selecting the target machines for transmission, select any desired options from the
bottom of the dialog box and click [Send] to transmit.
7. During transmission, the [Transmission Status] dialog box displays. This dialog box
displays the job and machines. The transmission status is displayed to the right of the
machine nickname. If any errors occur, click [Error Details] to display further information
about the errors. Click [Close] to close the dialog box when transmission is completed.
Note: The job name displays in the list of programs at the machine with the job name and a T for
the top side and B for the bottom side and the revision displays before these items.
5.2.4 Using [Multi lane transmission] to transmit
Follow the procedures below to transmit a job from within Director using the [Multi lane
transmission] command. By using multi lane transmission it is possible to transmit different
jobs to different lanes at one time.
1. Select [Transmit] - [Job] - [Multi lane transmission] from the [Tools] menu to display the
[Multi lane transmission] dialog box.
2. Select the lane for the job from the [Lane No.] drop-down list.
3. Click the [...] button to display the [Select Data] dialog box.
4. Select the job for the specified lane from the displayed list.
Note: It is not possible to select local jobs.
5. Click [Open] and the selected job is displayed in the [Job] text box.
5. Transmission QD004-18
150 NXT Programming Manual
6. Select the side of the panel to transmit using the [Panel Side] drop-down list.
7. Click [Set] to set the specified lane, job and side. The settings are displayed in the [JOB]
list.
8. Repeat setting the jobs for the different lanes until all jobs for the lanes have been
specified.
9. Select the line to transmit to from the [Line] drop-down list. The machines for that
specified line are displayed.
10.Select the machines to transmit to. The machines with a red X across the panel icon
cannot be selected.
11.After selecting the target machines for transmission, select any desired options from the
bottom of the dialog box.
12.Click [Send] to start transmitting the jobs to the specified lanes.
Note: Transmission is not possible to machines that have an error code number listed in the [Error
details] column. Select the machine in question and click the [Error details] button to display
the cause and remedy for the error.
Note: The NXT machine cannot be selected if the module configuration specified in Line Editor
does not match that specified in the job.
13.During transmission, the [Transmission Status] dialog box displays. This dialog box
displays the job and machines. The transmission status is displayed to the right of the
machine nickname. If any errors occur, click [Error Details] to display further information
about the errors. Click [Close] to close the dialog box when transmission is completed.
Note: The job name displays in the list of programs at the machine with the job name and a T for
the top side and B for the bottom side and the revision displays before these items.