FUJI NXT Programming Manual QD004-18.pdf - 第14页

2. Fuji Flexa and the NXT QD004-18 4 NXT Programming Manual MEMO:

QD004-18 2. Fuji Flexa and the NXT

NXT Programming Manual 3

2. Fuji Flexa and the NXT

2.1 Introduction

The NXT represents a new concept in the SMT field and is very different from previous Fuji

machines. Due to these differences, there some different procedures when programming

for the NXT in Fuji Flexa. A brief listing of the major differences is included below.

• The line configuration for NXT machines.

• The machine configuration for the NXT

• Line balancing is simplified

• Optimization has been improved

• Jobs are sent to the machine, not recipes

• New vision types

It is important to point out that while there are some new procedures and options in Fuji

Flexa for the NXT, that most of the settings and procedures have remained unchanged.

Even in some cases, an existing process has been simplified or is easier to use.

2. Fuji Flexa and the NXT QD004-18

4 NXT Programming Manual

MEMO:

QD004-18 3. Job Builder

NXT Programming Manual 5

3. Job Builder

3.1 Introduction

Job Builder is used to create and edit jobs. Most of the procedures for the NXT are the

same as previous Fuji machines. This chapter lists the general steps for creating jobs for

the various data types. The Job Builder procedures that are different or unique for the NXT

are also provided in this chapter. Part data settings for the NXT are covered in detail in 4.

"Part Data Settings".

3.2 General Steps to Creating NXT Jobs

This section provides a basic roadmap of procedures for creating jobs for the NXT based

upon the different methods of entering data in the job.

These roadmaps listed are only for general reference and are only designed to help in the

job creation process. There are cases when more or less steps are required depending on

the situation.

The details for performing the unique NXT steps listed in the following procedures are in the

following sections. The name in the steps that are marked (NXT) are based on the name

of that item in this manual. For details on procedures that are not marked (NXT), refer to

the Fuji Flexa User Manual, Chapter 2. The procedure can be determined based upon the

name of the corresponding step.

3.2.1 Starting by changing an existing job

Follow the steps below when changing a job that is currently complete for other machine

types into a job with an NXT line. Generating recipes is not necessary for the NXT unless

one wants to view reports. Because this job was already completed using other machines,

panelizing, and importing data is not required.

1. Open the existing job.

2. Change the current line to the new NXT line. (NXT)

3. Enter the machine configuration and process data. (NXT)

4. Enter auto backup pin data. (NXT, only for equipped machines)

5. Change certain part data for the NXT. (NXT)

6. Line balance the work load. (NXT)

7. Optimize the job. (NXT)

8. Generate reports. (NXT)

3.2.2 Starting by manually entering sequence data

If no outside data files are available, it is possible to create a job completely through data

entry. Follow the roadmap below to create a basic job through manual data entry.

Generating recipes is not necessary for the NXT unless one wants to view reports.

1. Create a job manually.

2. Add a line to the job.