FUJI NXT Programming Manual QD004-18.pdf - 第109页
QD004-18 4. Part Data Settings NXT Programming Manual 99 4.4.3 Package Information details Tape Tape Width Specify the width of the tape. Feed Pitch Specify the distance in millimeters fro m one cavity center to the next…
4. Part Data Settings QD004-18
98 NXT Programming Manual
4.4 Package Data
The following list is the part data settings used by the NXT for package data.
4.4.1 Package Information tab
The settings for items with an O in the “Chg” column can be changed in MEdit. The settings
for items with an X in this column cannot be changed in MEdit.
4.4.2 Package Process tab
The settings for items with an O in the “Chg” column can be changed in MEdit. The settings
for items with an X in this column cannot be changed in MEdit.
Package
Type
Name Comments Chg
All Packaging Type This affects all package types X
Tape Tape Width X
Feed Pitch X
Stick Tape Width X
Tape Depth X
Tray Tray Length (X) O
Tray Width (Y) O
Tray Thickness O
First Pick Position X O
First Pick Position Y O
Column Pitch O
Row Pitch O
Column Quantity X
Row Quantity X
Dump Pick Position X Only when a remover is present. O
Dump Pick Position Y Only when a remover is present. O
Dump Pick Position Z Only when a remover is present. O
Package
Type
Name Comments Chg
Tape Reel Diameter This is used by Fuji Flexa only. X
Tray Tray Type Some tray types cannot be used. O
Tray Cavity
Information
This is a machine control setting. O
QD004-18 4. Part Data Settings
NXT Programming Manual 99
4.4.3 Package Information details
Tape
Tape Width
Specify the width of the tape.
Feed Pitch
Specify the distance in millimeters from one cavity center to the next cavity center.
Indexing Speed
Specify the tape indexing speed.
Assign Feeder Indexing Settings
Set whether to specify the tape pitch and indexing speed in the job (On/Off).
Stick
Tape Width
Specify the width of the stick feeder. Select “16mm” for the 1S and 1L type stick feeders
(used for 18 mm wide or less sticks). Select “32mm” for the 2S and 2L type stick feeders
(used for 36 mm wide or less sticks).
Tape Depth
Set this to “0”. This value is fixed.
Tray
Tray Length (X)
Specify the tray size in the X-dimension.
Tray Width (Y)
Specify the tray size in the Y-dimension.
Tray Thickness
Specify the tray thickness.
First Pickup Position X
Specify the X-position at which the machine should pick up the first part from the lower right
corner of the tray.
First Pickup Position Y
Specify the Y-position at which the machine should pick up the first part from the lower right
corner of the tray.
Column Pitch
Specify the pitch between the columns for the tray.
Row Pitch
Specify the pitch between the rows for the tray.
Column Quantity
Specify the number of columns for the tray.
4. Part Data Settings QD004-18
100 NXT Programming Manual
Row Quantity
Specify the number of rows for the tray.
Dump Pick Position X
Specify the X-direction coordinate of the point where the vacuum pad should pick up an
empty tray for removal.
Dump Pick Position Y
Specify the Y-direction coordinate of the point where the vacuum pad should pick up an
empty tray for removal.
Dump Pick Position Z
Specify the height of the pickup point where the machine should perform the pickup action
when removing an empty tray.