FUJI NXT Programming Manual QD004-18.pdf - 第39页

QD004-18 3. Job Builder NXT Programming Manual 29 Specifying the feed er setup for an NXT Making settings in the [F eeder Setup] tab is not normally necessary. The feeder setup will be automatically reconfigured based up…

3. Job Builder QD004-18

28 NXT Programming Manual

Specifying the available nozzles for a machine

By setting which nozzles are available for the NXT machine, only the nozzles specified as

being available display when a user is selecting a nozzle for a position. This ensures that

a nozzle is not accidentally selected that is not available and reduces the amount of choices

in the nozzles drop-down list, thus allowing easier selection. It is also possible to specify

the quantity of nozzles.

1. There are several tabs at the bottom of the [Machine Configuration] pane. Select the

[Nozzle Available] tab and the available nozzles for the machine display.

2. Double-click in the data cell under [Available] that is on the row for the desired nozzle

and a drop-down list box displays. Select “Yes” if that nozzle is available for that

machine, or “No” if the nozzle is not available for that machine. Repeat until all of the

available and unavailable nozzles have been specified.

3. If you want to specify the quantity of nozzles present, then scroll the window to the right

and then specify the quantity of nozzles available in the [Qty] column. If left at 0 and the

nozzle available setting is “Yes”, then it is considered that there is no limit on the nozzle

quantity.

01PRG-0058E

QD004-18 3. Job Builder

NXT Programming Manual 29

Specifying the feeder setup for an NXT

Making settings in the [Feeder Setup] tab is not normally necessary. The feeder setup will

be automatically reconfigured based upon the available feeders during optimization.

01PRG-0059E

3. Job Builder QD004-18

30 NXT Programming Manual

Specifying the available feeders for a machine

By setting which feeders are available for the NXT machine, an unavailable feeder will not

be selected when optimization is performed. In addition, it is possible to specify the quantity

of each feeder type available so the optimizer will not use more feeders of a certain type

than that is available.

1. There are several tabs at the bottom of the [Machine Configuration] pane. Select the

[Feeder Available] tab and the available feeders for the machine display.

2. Double-click in the data cell under [Available] that is on the row for the desired feeder

and a drop-down list displays. Select the “Yes” if that feeder is available for that

machine, or “No” if the feeder is not available for that machine. Repeat until all of the

available and unavailable feeders have been specified.

3. If you want to specify the quantity of feeders present, then scroll the window to the right

and then specify the quantity of feeders available in the [Qty] column. If left at 0 and the

feeder available setting is “Yes”, then it is considered that there is no limit on the feeder

quantity.

The new settings will take effect the next time optimization is performed.

01PRG-0060E