FUJI NXT Programming Manual QD004-18.pdf - 第144页
4. Part Data Settings QD004-18 134 NXT Programming Manual Case: 2 Entire body color is white or light color (white, red, orange, brown, yellow) Inside the body (Refer to fig. 5) Outside of the body Good Poor (Refer to fi…
QD004-18 4. Part Data Settings
NXT Programming Manual 133
4.6.3 Selecting a Vision Type flowcharts (leaded parts)
Case 1: Entire body color is black or a dark color (black, blue, green or
yellow green)
No
Non-rectangular or connected
to some other leads
The outside shape of the white items is rectangular
(Refer to fig. 3)
The outside shape of the white items is rectangular (Refer to fig. 3)
Yes
Non-rectangular or connected
to some other leads
No
Yes
Entire body color is
black or a dark color
(black, blue, green or
yellow green)
Lead shape Part shape
Vision Type 18 or 19
(Use 19 when checking leads)
One element has more
than five leads?
Lead shape
Element
directions
Part shape
Vision Type 123
The part has J-leads
Yes (Refer to fig. 1)
Rectangular and not connected to other leads
(Refer to fig. 2)
The outside shape of the white items is not rectangular
(Refer to fig. 4)
The outside shape of the white items is not rectangular (Refer to fig. 4).
Cannot be determined
Vision Type 70
NXTVPP038Ea
No
Leads are diagonal
and there are only 2
Rectangular and not connected to other leads
(Refer to fig.2)
Vision Type 181 Vision Type 180
Vision Type 18 or 19
(Use 19 when checking leads)
Vision Type 152
Vision Type 124
2 to 4 directions
1 direction
4. Part Data Settings QD004-18
134 NXT Programming Manual
Case: 2 Entire body color is white or light color (white, red, orange,
brown, yellow)
Inside the body
(Refer to fig. 5)
Outside of
the body
Good
Poor (Refer to fig. 6)
No (Refer to fig. 7)
Yes
Nearly straight
Not straight
There should be at least one side with 2 body detection points, or there
should be at least two sides with one body detection point each.
(Refer to fig. 8)
There is NOT a side that can have 2 body detection points, or
there are NOT two sides that can have a body detection point.
Lead position
Lead shape
There are areas approx.1 mm in length along
the body edge without leads
Condition of the body edge
areas without leads
Body detection point
Entire body color is white
or light color (white, red,
orange, brown, yellow)
Vision Type 251 or 252
Vision Type 153
Vision Type 160
NXTVPP039Ea
QD004-18 4. Part Data Settings
NXT Programming Manual 135
Case 3: Black body with partial white or there is a metal part in addition
to the lead
Almost the same as
the body size
Connected
Unconnected (Refer to fig. 9) Smaller than
the body size
The outside shape of the white items is rectangular (Refer to fig. 3)
The outside shape of the white items is not rectangular (Refer to fig. 4)
Cannot be determined
No
Yes
2 to 4 directions
1 direction
Non-rectangular or
connected to some other leads
Rectangular and not connected
to other leads (Refer to fig. 2)
No
Yes
(Refer to fig. 11)
Black body with
partial white or there
is a metal part in
addition to the lead
Lead and white parts
are connected or
unconnected
Parts shape
Element directions
The size of the white
area
Use the "Entire body is white or light
color (red, orange, brown or yellow)"
flowchart
Part shape
Vision Type 123
Lead shape Parts shape
Vision Type 152
One element has more
than five leads?
Shapes similar to leads
are in the body.
Vision Type 70
(Refer to fig. 10)
NXTVPP040Ea
Vision Type 18 or 19
(Use 19 when checking leads)
Vision Type 18 or 19
(Use 19 when checking leads)
The outside shape of the white items is not rectangular (Refer to fig. 4)
Cannot be determined
The outside shape of the white items is rectangular (Refer to fig. 3)
The outside shape of the white items is rectangular (Refer to fig. 3)
The outside shape of the white items is not rectangular (Refer to fig. 4)
Cannot be determined
Parts shape
The outside shape of the white items is not rectangular
(Refer to fig. 4) Cannot be determined
The outside shape of the white items is rectangular (Refer to fig. 3)