FUJI NXT Programming Manual QD004-18.pdf - 第213页

QD004-18 Glossary NXT Programming Manual 203 and then adjusts the stencil position to co mpensate for any misalig nment between the two. MCSIMF format An intermediary file format. MCS programs an d part data translated b…

Glossary QD004-18

202 NXT Programming Manual

also describes all of the lines for the factories and their order.

Line Editor

The Fuji Flexa component used to create and edit the line configuration.

Line Monitor

The Fuji Flexa component used to monitor the real time production performance of entire

lines and individual machines in the line configuration.

Line Reporter

The Fuji Flexa component used to generate production reports according to specified

settings. Reports can be prepared for obtained production data up to 7 days (i.e., 168

hours) prior to the time of report generation.

line server

This is a Fuji Flexa server ran on a computer and specifies the location of the line

configuration files and manages access to these files.

local job

A job that is stored on a local computer. This job is not managed by the job server and is

not accessible to any other users.

machine configuration

A file that specifies the configuration, process options, available nozzles and feeders for a

machine. Each machine in the line must have a configuration with the specific parameters

for that machine.

macro

Sets of instructions that are automatically performed when activated.

Macro Manager

The Fuji Flexa component used to create, modify, save, and run macros

mark data

There are five different types of mark data. They are fiducial marks, skip marks, glue marks,

mask marks, and panel ID marks

Mark Editor

The Fuji Flexa component used to create and edit mark data.

mark library

The library in which mark data is stored. The part data server manages access to this

library.

mask mark

These are marks used by printing machines to align the printing stencil with the board. The

printing machine inspects the fiducial marks on the board and mask marks on the stencil

QD004-18 Glossary

NXT Programming Manual 203

and then adjusts the stencil position to compensate for any misalignment between the two.

MCSIMF format

An intermediary file format. MCS programs and part data translated by Port Wizard are

output as MCSIMF files.

MEdit

This is a special program used to edit jobs on NXT machines and perform special functions

such as simulation and skipping nozzles. This software is installed from the NXT

application installation CD-ROM.

menu bar

This displays below the title bar for programs. Commands are organized into groups and

these group names display on the menu bar. By clicking a name, the menu with the

commands for that group displays. Click an item to perform that command.

model name

The model name is a generic machine name that is used when using multiple lines with

identical line and machine configurations (including nozzles, parts supply unit, etc.). This

allows users to use the same recipe from machine to machine when producing identical

panels on multiple lines.

next job

An portion of the machine's memory is used to store the information for the next job that

has been sent to the machine. This job is usually the job that is to be produced after the

current job is completed. Only one job can be sent to the next job position in the machine

per lane.

non-relational mode

This is a mode used for part data. When this mode is used, the "Part Number", "Shape

Name" and "Package Name" data is all saved under the one file name. There is no

interlinking between the different part data. This mode prevents user from accidentally

editing package and shape data for various part at one time and is similar to Fuji's previous

host system, MCS. This mode is specified in Flexa Server Setup in the [System settings]

dialog box on the computer running the user server.

Nozzle Mapper

The Fuji Flexa component that is a conversion tool designed to convert the nozzle settings

for part data when importing Port Wizard translated CCIMF or MCSIMF data from F4G or

MCS into Job Builder.

optimization

The process where machine instructions are reordered so that the machine operates

optimally. Normally, the processing sequence and feeder positions are rearranged in a

manner that minimizes the machine’s working time.

Glossary QD004-18

204 NXT Programming Manual

package data

Data that describes packaging used for parts. The package data ís comprised of type,

dimensions, pitch, and other parameters that a machine needs to process that package for

the part that uses that data. This data is comprised of two groups of data, package

information, and package process.

Package Editor

The Fuji Flexa component that is used to create and edit package data. This editor is only

available if relational mode is enabled from the Flexa Server Setup.

package information

Data that has the settings that are used to describe the package. The package's pitch,

dimensions, and type are examples of settings found in package information. This is one

of the groups of data that makes up package data.

package library

The library in which package data is stored. This library is only accessible if relational mode

is enabled in Flexa Server Setup. The part data server manages access to this library.

package process

Data that has the settings on how the packaging using that data is to be processed by the

machine. Feeder options, reel diameter, and do advanced vacuum are examples of

settings found in package process. This is one of the groups of data that makes up package

data.

panel

The entire printed circuit board (PCB) upon which electronic components are placed. A

panel may be composed of one or more actual boards.

part data

All part data items. This refers to data for the part number, shape data, and package data

if relational mode is enabled. If it is not enabled, then shape data and package data is not

displayed.

part data server

This is a Fuji Flexa server ran on a computer and specifies the location of the part data files

and manages access to these files.

Part Editor

The Fuji Flexa component that is used to create and edit part data. If relational mode is

enabled from the Flexa Server Setup, this editor is used to create and edit part number

data. If non-relational mode is used, this editor is used to create and edit all part data

part library

The library in which part data is stored. The part data server manages access to this library