XP Type II 工程师培训手册 (2.0).pdf.pdf - 第112页

FK-9F98-34 XP T ype II Series T raining T ext for Service Engineers Edition 2.0 XP242E – Chapter 1 Initial Adjustment Page 8 of 8 Fuji Flexa 1. At the PC select [S t art] – [Programs] – [A ccessories] – [Windows Explorer…

FK-9F98-34 XP Type II Series Training Text for Service Engineers

Edition 2.0 XP242E – Chapter 1 Initial Adjustment Page 7 of 8

7. To confirm that the machine and PC are communicating, enter the F4G Operator Module

and open up the [Transmit Engine] and then the [Transmitter].

FujiCam

1. At the PC select [Start] – [Programs] – [Windows NT Explorer] – [Winnt] – [System 32] –

[drivers] – [etc] – [Hosts] and open the hosts file with notepad, a text file similar to the one

below will then open:

127.0.0.1 localhost

192.168.33.190 italy

192.168.39.2 pascal

192.168.39.10 uk

192.168.33.154 XP241A

Make a new entry, and in the first column input the machine's IP address, then a "host

name" in the next column. Close and save the file.

2. At the PC select [Start] - [Programs] - [FujiCam] - [Line Editor] - [Edit] - [Add Machine],

then fill out the new machine information as described below:

Machine Nickname: input the same host name as that registered in the hosts file.

Machine Type: Select the appropriate machine type from the pull down list.

GEM Not Use: No.

Get Production Data: No.

Recipe Name, Top: input the top recipe name for the machine.

Recipe Name, Bottom: input the bottom recipe name for the machine.

Host Name: Input the name of the FujiCam license holding server.

PPS Exist: No.

Use HELPS: No.

Cell Status: Unit.

Termination Type: Manual.

Use KIT: No.

C/C: No need to fill out this information as the XP uses F.T.P.

SECS/GEM: No need to fill out this information as the XP uses F.T.P.

2. Finally confirm that the PC and machine are communicating.

Fuji Machine Mfg. Co., Ltd. Okazaki.

SMT Equipment Quality Assurance Dept.

1 – 7 CS Section

FK-9F98-34 XP Type II Series Training Text for Service Engineers

Edition 2.0 XP242E – Chapter 1 Initial Adjustment Page 8 of 8

Fuji Flexa

1. At the PC select [Start] – [Programs] – [Accessories] – [Windows Explorer] – [Local Disk

(C:)] – [WINNT] – [SYSTEM32] – [DRIVERS] – [etc] – [hosts] and open the hosts file with

notepad, a text file similar to the one below will then open:

127.0.0.1 localhost

192.168.27.193 XP242A

2. Make a new entry, and in the first column input the machine’s IP address, then the

machine nickname in the next column (the machine nickname is the “Target” name

entered in [Start Up Settings] at the machine). Close and save the file.

3. Click the [Start] button and select [Programs] – [Fuji Flexa] – [Director] to display the

Director.

4. Click [Factory Lines] from the [Main] icon bar.

5. Right-click in the group contents pane and select [New] – [Factory…]. The [New Factory]

dialog box displays.

6. Enter the factory name and click [OK]. The factory displays in both panes.

7. Select the factory, right-click in the group contents pane and select [New] – [Line…]. The

[New Line] dialog box displays.

8. Enter the line name and click [OK]. The line name displays under the factory.

9. Select the line, right-click in the group contents pane and select [New] – [Machine…].

The [New Machine] dialog box displays.

10. Enter the machine details and click [OK].

11. Enter the PC host name in the [Machine Communication Server] field and then click

[Save].

Fuji Machine Mfg. Co., Ltd. Okazaki.

SMT Equipment Quality Assurance Dept.

1 – 8 CS Section