XP Type II 工程师培训手册 (2.0).pdf.pdf - 第18页

FK-9F98-34 XP T ype II Series T raining T ext for Service Engineers Edition 2.0 XP142E – Chapter 1 Initial Adjustment Page 8 of 8 Fuji Machine Mfg. Co., Ltd.Okazaki 5. Right-click in the group contents p ane and sele ct …

FK-9F98-34 XP Type II Series Training Text for Service Engineers

Edition 2.0 XP142E – Chapter 1 Initial Adjustment Page 7 of 8

Fuji Machine Mfg. Co., Ltd.Okazaki

FujiCam

1. At the PC select [Start] – [Programs] – [Windows NT Explorer] – [Winnt] – [System 32]

– [drivers] – [etc] – [Hosts] and open the hosts file with notepad, a text file similar to the

one below will then open:

127.0.0.1 localhost

192.168.33.190 italy

192.168.39.2 pascal

192.168.39.10 uk

192.168.33.154 XP241A

Make a new entry, and in the first column input the machine's IP address, then a "host

name" in the next column. Close and save the file.

2. At the PC select [Start] - [Programs] - [FujiCam] - [Line Editor] - [Edit] - [Add Machine],

then fill out the new machine information as described below:

Machine Nickname: input the same host name as that registered in the hosts file.

Machine Type: Select the appropriate machine type from the pull down list.

GEM Not Use: No.

Get Production Data: No.

Recipe Name, Top: input the top recipe name for the machine.

Recipe Name, Bottom: input the bottom recipe name for the machine.

Host Name: Input the name of the FujiCam license holding server.

PPS Exist: No.

Use HELPS: No.

Cell Status: Unit.

Termination Type: Manual.

Use KIT: No.

C/C: No need to fill out this information as the XP uses F.T.P.

SECS/GEM: No need to fill out this information as the XP uses F.T.P.

2. Finally confirm that the PC and machine are communicating.

Fuji Flexa

1. At the PC select [Start] – [Programs] – [Accessories] – [Windows Explorer] – [Local Disk

(C:)] – [WINNT] – [SYSTEM32] – [DRIVERS] – [etc] – [hosts] and open the hosts file with

notepad, a text file similar to the one below will then open:

127.0.0.1 localhost

192.168.27.193 XP242A

2. Make a new entry, and in the first column input the machine’s IP address, then the machine

nickname in the next column (the machine nickname is the “Target” name entered in [Start

Up Settings] at the machine). Close and save the file.

3. Click the [Start] button and select [Programs] – [Fuji Flexa] – [Director] to display the

Director.

4. Click [Factory Lines] from the [Main] icon bar.

SMT Equipment Quality Assurance Dept.

1 – 7 CS Section

FK-9F98-34 XP Type II Series Training Text for Service Engineers

Edition 2.0 XP142E – Chapter 1 Initial Adjustment Page 8 of 8

Fuji Machine Mfg. Co., Ltd.Okazaki

5. Right-click in the group contents pane and select [New] – [Factory…]. The [New Factory]

dialog box displays.

6. Enter the factory name and click [OK]. The factory displays in both panes.

7. Select the factory, right-click in the group contents pane and select [New] – [Line…]. The

[New Line] dialog box displays.

8. Enter the line name and click [OK]. The line name displays under the factory.

9. Select the line, right-click in the group contents pane and select [New] – [Machine…]. The

[New Machine] dialog box displays.

10. Enter the machine details and click [OK].

11. Enter the PC host name in the [Machine Communication Server] field and then click [Save].

SMT Equipment Quality Assurance Dept.

1 – 8 CS Section