XP Type II 工程师培训手册 (2.0).pdf.pdf - 第17页

FK-9F98-34 XP T ype II Series T raining T ext for Service Engineers Edition 2.0 XP142E – Chapter 1 Initial Adjustment Page 7 of 8 Fuji Machine Mfg. Co., Ltd.Okazaki FujiCam 1. At the PC select [St art] – [Programs] – [W …

100%1 / 248
FK-9F98-34 XP Type II Series Training Text for Service Engineers
Edition 2.0 XP142E – Chapter 1 Initial Adjustment Page 6 of 8
Fuji Machine Mfg. Co., Ltd.Okazaki
MCS/X
1. At the PC select [Start] – [Programs] – [MCSX] – [MCSX].
2. Click on the [File Manager] tab to bring up the "File Exchange" window.
3. To add a line, click on [Add Line], then enter a new line name, and click on [OK].
4. To add a machine, click on [Add M/C]:
Line Name: Choose an available line.
Machine nick n
ame: For example XP241A
Machine t
ype: Input the machine type.
I
P Address: Input an IP address.
5. When finished click on [OK].
F4G
1. At the PC select [Start] – [Programs] – [Windows NT Explorer] – [Winnt] – [System 32]
– [drivers] – [etc] – [hosts] and open the hosts file with notepad, a text file similar to the
one below will then open:
127.0.0.1 localhost
192.168.33.190 italy
192.168.39.2 pascal
192.168.39.10 uk
192.168.33.154 XP241A
2. Make a new entry, and in the first column input the machine's IP address, then a "host
name" in the next column. Close and save the file.
3. Select [Start] – [Programs] – [F4G] – [F4G] – [Line Config] and a text file will open. In
the MC Name column input the same hosts name as that registered in the hosts file, then in
the HOSTNAME column also input the same host name as that registered in the hosts file,
in this case XP241A. Under the MCTYPE column input the machine type, for example
XP241. Close and save the file.
4. At the PC select [Start] – [Programs] – [Windows NT Explorer] – [F4G] – [CC] –
[Passwd] and open the passwd file with notepad, a text file similar to the one below will
then open:
# C/C OS User-ID PassWord
#cc1, OS9, super, user
italy, WINDOWSNT, Administrator,
XP241A, WINDOWSNT, anonymous,
Make a new entry, and in the first column of the new entry input the same host name as that
registered in the hosts file. In the OS column input WINDOWSNT, and in the User-ID
column input, anonymous. Close and save the file.
5. The settings are now complete, restart the computer in order for them to take effect.
6. To confirm that the machine and PC are communicating, enter the F4G Operator Module
and open up the Transmit Engine and then the Transmitter.
SMT Equipment Quality Assurance Dept.
1 – 6 CS Section
FK-9F98-34 XP Type II Series Training Text for Service Engineers
Edition 2.0 XP142E – Chapter 1 Initial Adjustment Page 7 of 8
Fuji Machine Mfg. Co., Ltd.Okazaki
FujiCam
1. At the PC select [Start] – [Programs] – [Windows NT Explorer] – [Winnt] – [System 32]
– [drivers] – [etc] – [Hosts] and open the hosts file with notepad, a text file similar to the
one below will then open:
127.0.0.1 localhost
192.168.33.190 italy
192.168.39.2 pascal
192.168.39.10 uk
192.168.33.154 XP241A
Make a new entry, and in the first column input the machine's IP address, then a "host
name" in the next column. Close and save the file.
2. At the PC select [Start] - [Programs] - [FujiCam] - [Line Editor] - [Edit] - [Add Machine],
then fill out the new machine information as described below:
Machine Nickname: input the same host name as that registered in the hosts file.
Machine Type: Select the appropriate machine type from the pull down list.
GEM Not Use: No.
Get Production Data: No.
Recipe Name, Top: input the top recipe name for the machine.
Recipe Name, Bottom: input the bottom recipe name for the machine.
Host Name: Input the name of the FujiCam license holding server.
PPS Exist: No.
Use HELPS: No.
Cell Status: Unit.
Termination Type: Manual.
Use KIT: No.
C/C: No need to fill out this information as the XP uses F.T.P.
SECS/GEM: No need to fill out this information as the XP uses F.T.P.
2. Finally confirm that the PC and machine are communicating.
Fuji Flexa
1. At the PC select [Start] – [Programs] – [Accessories] – [Windows Explorer] – [Local Disk
(C:)] – [WINNT] – [SYSTEM32] – [DRIVERS] – [etc] – [hosts] and open the hosts file with
notepad, a text file similar to the one below will then open:
127.0.0.1 localhost
192.168.27.193 XP242A
2. Make a new entry, and in the first column input the machine’s IP address, then the machine
nickname in the next column (the machine nickname is the “Target” name entered in [Start
Up Settings] at the machine). Close and save the file.
3. Click the [Start] button and select [Programs] – [Fuji Flexa] – [Director] to display the
Director.
4. Click [Factory Lines] from the [Main] icon bar.
SMT Equipment Quality Assurance Dept.
1 – 7 CS Section
FK-9F98-34 XP Type II Series Training Text for Service Engineers
Edition 2.0 XP142E – Chapter 1 Initial Adjustment Page 8 of 8
Fuji Machine Mfg. Co., Ltd.Okazaki
5. Right-click in the group contents pane and select [New] – [Factory…]. The [New Factory]
dialog box displays.
6. Enter the factory name and click [OK]. The factory displays in both panes.
7. Select the factory, right-click in the group contents pane and select [New] – [Line…]. The
[New Line] dialog box displays.
8. Enter the line name and click [OK]. The line name displays under the factory.
9. Select the line, right-click in the group contents pane and select [New] – [Machine…]. The
[New Machine] dialog box displays.
10. Enter the machine details and click [OK].
11. Enter the PC host name in the [Machine Communication Server] field and then click [Save].
SMT Equipment Quality Assurance Dept.
1 – 8 CS Section