XP Type II 工程师培训手册 (2.0).pdf.pdf - 第4页

FK-9F98-34 XP T ype II Series T raining T ext for Service Engineers Edition 2.0 About this Manual Page Layout Each page indicates the chapter numb er and title, section number, body, manual name, page number and edition …

100%1 / 248
FK-9F98-34 XP Type II Series Training Text for Service Engineers
Edition 2.0 About this Manual
About This Manual
This manual contains machine adjustment information for service engineers. The manual content is
intended for engineers familiar with the systems integrated within this machine.
Please read this manual carefully in order to ensure safe and efficient machine servicing.
Manual Structure
This manual is divided into an XP142E manual, an XP242E manual, and a supplementary information
section. The manuals consist of the following Chapters:
XP142E
Chapter 1 – Initial Adjustment
Chapter 2 – Origin Adjustment
Chapter 3 – Static Accuracy
Chapter 4 – Loader Adjustment
Chapter 5 – Peripheral Adjustment
Chapter 6 – Proper Data Measurements
Chapter 7 – Operation and Accuracy
XP242E
Chapter 1 – Initial Adjustment
Chapter 2 – Origin Adjustment
Chapter 3 – Static Accuracy
Chapter 4 – Loader Adjustment
Chapter 5 – Peripheral Adjustment
Chapter 6 – Proper Data Measurements
Chapter 7 – Operation and Accuracy
Chapter 8 – Type II MTU Adjustment
Chapter 9 – Options
Supplemental Information
XP142E Servo Parameter List (Vol.3)
XP242E Servo Parameter List (Vol.3)
V2.00 Proper Data List
Mechanical Stopper Locations.
XP242E T and U Axes Brake Bypass Procedure
Fuji Machine Mfg. Co., Ltd. Okazaki
SMT Equipment Quality Assurance Dept.
CS Section
i
FK-9F98-34 XP Type II Series Training Text for Service Engineers
Edition 2.0 About this Manual
Page Layout
Each page indicates the chapter number and title, section number, body, manual name, page number
and edition number.
Chapter number and title
XP Type II Series Training Text for Service Engineers
Manual reference number
FK-9F98-XX
Edition number
Edition 2.0
XP142E – Chapter 1 Initial Adjustment
Fuji Machine Mfg. Co., Ltd. Okazaki
SMT Quality Assurance Dep
t
Section number
1.1 Leveling
1-1
Body
Manual name
Page number Manual created by
Chapter number
The chapter number to which each section belongs is shown in the header on each page.
The manual is made up of 15 chapters as detailed earlier in this section.
Section number and title
The title of each chapter is shown in the header on each page. Each part may contain one or more
sections.
Section title
Each chapter may be divided into several sections. The section number is composed of the number of
the chapter to which the section belongs, followed by a sequential number for each section.
Body
The information needed to understand the workings of the machine and how to perform adjustments is
explained using text and illustrations.
Fuji Machine Mfg. Co., Ltd. Okazaki
SMT Equipment Quality Assurance Dept.
CS Section
i
i
FK-9F98-34 XP Type II Series Training Text for Service Engineers
Edition 2.0 About this Manual
Page number
A two digit hyphenated number appears in the footer on each page. The first digit of each page
number indicates the chapter number and the second digit is the sequential page number within that
chapter. Page 1-2, for example, indicates that this is the second page in the first chapter.
Manual name
The name of the manual that appears on the cover is also shown in the header on each page.
Edition number: The edition number is updated each time the manual is revised, with the number
reflecting the scale of changes that were made.
Minor revision: Minor changes are reflected in the part of the edition number after the decimal point,
for example, a change from edition 1.0 to 1.1. This change is made on the revised
pages only, and these pages can be downloaded as required from the Okazaki web
site.
Major revision: If major changes are made, the edition number is increased by one, for example, a
change from edition 1.0 to 2.0. This change is made on all pages, including the cover.
Purpose of this Training
• To provide knowledge and practical training in the areas of calibration and adjustment for the XP
Series machine.
• Carry out practical training for calibrating the various subsystems contained within the machine.
• Give practical exercises on how to adjust, calibrate and maintain the subsystems to enhance the
overall efficiency of the machine.
Persons Qualified for This Training
Any agent level service engineers with experience in machine operation, maintenance will benefit from
the information contained in this manual.
This manual was primarily made for “Agent” level service engineers.
Every effort has been made to make the contents of this manual as accurate as possible. If an error is
found, please let us know the page, section number, plus a brief description of the error. Thank you in
advance for your cooperation and assistance. Comments and opinions regarding this manual can be
sent to:
trgall@okazaki.fuji.co.jp
Fuji Machine Mfg. Co., Ltd. Okazaki
SMT Equipment Quality Assurance Dept.
CS Section
ii
i