00197498-03_UM_SiplaceCA-Serie_EN.pdf - 第158页
3 Technical Data User Manual SIPLACE CA-Series 3.7 Placement Heads From software version SC.708.0 Edition 12/2014 EN -DR AFT 158 3.7.2.6 MultiSt ar in Collect&Place Mode The MultiS tar does not pr ocess comp onents i…
User Manual SIPLACE CA-Series 3 Technical Data
From software version SC.708.0 Edition 12/2014 EN -DRAFT 3.7 Placement Heads
157
3.7.2.4 Placement Modes for MultiStar
The CPP head functions with different placement modes, which vary according to the component
class. The setup optimization selects the placement mode with the shortest cycle times. The fol-
lowing table shows the correlation between component class and placement mode.
Tab. 3.7 - 2 Relations between component class and placement modes
3
3
3.7.2.5 Assembly Positions of MultiStar in the Machine
Placement mode Component class
Small component Medium sized
component
Large component
Collect&Place mode Yes No No
Mixed mode Yes Yes No
Advanced
Pick&Place mode
Yes Yes Yes
Pick&Place mode
only
No No Yes
Placement machine Assembly
position
*a
CPP head
Maximum component
height
Vision camera
SIPLACE CA Bottom 6 mm Head camera
Top 8.5 mm Head camera
Top only 11.5 mm
Stationary component
camera
Tab. 3.7 - 3 Assembly positions of CPP head in the machine
*)a Please observe the rules for assembly position heights in section 3.7.2.2
, page 155.
3 Technical Data User Manual SIPLACE CA-Series
3.7 Placement Heads From software version SC.708.0 Edition 12/2014 EN -DRAFT
158
3.7.2.6 MultiStar in Collect&Place Mode
The MultiStar does not process components in this mode.
3
Fig. 3.7 - 7 MultiStar - Collect&Place mode
K_BE Small component (see table 3.7 - 1, page 156)
Type 30 Component camera, type 30
1 ... 12 Order of components taken up
3
Type 30
K_BE
User Manual SIPLACE CA-Series 3 Technical Data
From software version SC.708.0 Edition 12/2014 EN -DRAFT 3.7 Placement Heads
159
3.7.2.7 MultiStar in Mixed Mode
The MultiStar processes small to medium sized components in this mode.
3
Fig. 3.7 - 8 MultiStar - mixed mode
K_BE Small component (see table 3.7 - 1, page 156)
M_BE_1 Medium sized component, type 1 (see table 3.7 - 1
, page 156)
M_BE_2 Medium sized component, type 2 (see table 3.7 - 1
, page 156)
Type 30 Component camera, type 30
Type 33 Stationary component camera, type 33
1 ... 8 Order of components taken up
1 ... 12 Order of components taken up
3
Neighboring segments of the CPP head are not able to take up components of type M_BE_2 if the
diagonal length of the medium sized component, type 2 (M_BE_2) is longer than 39.8 mm.
Type 30 Type 30
Type 33 Type 33
K_BE
M_BE_2
M_BE_1
K_BE