00197498-03_UM_SiplaceCA-Serie_EN.pdf - 第466页

8 Station Extensions User manua l SIPLACE CA-Series 8.1 Nozzle Changers From software version SC.708.0 Edition 12/2014 EN -DRAFT 466  Press the magazine down evenly so that the snap fastener balls eng age in all the sna…

100%1 / 518
User manual SIPLACE CA-Series 8 Station Extensions
From software version SC.708.0 Edition 12/2014 EN -DRAFT 8.1 Nozzle Changers
465
8
Fig. 8.1 - 14 Changing the magazine (example of 6 magazines)
Fig. 8.1 - 15
(1) Lever for raising the magazine
(2) Parallel pin, engages in the hole in the magazine
(3) Spring pin for triggering the microswitch for magazine recognition and the safety loop
(4) Pin of the slide mechanism, moves the locking plate
(5) Ball of snap fastener
(6) Parallel pin, engages in the slot in the magazine
(7) Locking plate in the "magazine locked" position
8
Place the magazine on the snap fastener balls (item 5 in fig. 8.1 - 14, page 465).
PLEASE NOTE
Move the locking plate into the "Magazine locked" position.
Before inserting, align the magazine so that the centering pins (items 2 and 6 in fig.
8.1 - 14
, page 465) can slide into the centering holes and slot.
8 Station Extensions User manual SIPLACE CA-Series
8.1 Nozzle Changers From software version SC.708.0 Edition 12/2014 EN -DRAFT
466
Press the magazine down evenly so that the snap fastener balls engage in all the snap fas-
teners at the same time.
8.1.3.7 Position detection
Each magazine of the nozzle changer has two fiducials: one for determining the position and one
for determining the angular position.
8
Fig. 8.1 - 16 Nozzle magazine - fiducials for determining the position and angular position
(1) Locking plate in the "magazine open" position
(2) Fiducial for determining the angular position
(3) Fiducial for determining the position
User manual SIPLACE CA-Series 8 Station Extensions
From software version SC.708.0 Edition 12/2014 EN -DRAFT 8.1 Nozzle Changers
467
8.1.3.8 Nozzle Changer "Row 2" for the SIPLACE MultiStar and SpeedStar
Item no. 00119742-xx Nozzle changer 2 for CPP, X-Series
The "row 2" nozzle changer can be installed at the following locations:
CA4 machine: Locations 1, 2, 3 and 4
The retrofit package contains the nozzle changer and an assembly kit.
8
Fig. 8.1 - 17 Assembly kit for the "row 2" nozzle changer
8
8