00197498-03_UM_SiplaceCA-Serie_EN.pdf - 第458页
8 Station Extensions User manua l SIPLACE CA-Series 8.1 Nozzle Changers From software version SC.708.0 Edition 12/2014 EN -DRAFT 458 8.1.2.8 "Row 2" Nozzle Changers for the SIPLACE SpeedS tar (C&P20 M) [001…
User manual SIPLACE CA-Series 8 Station Extensions
From software version SC.708.0 Edition 12/2014 EN -DRAFT 8.1 Nozzle Changers
457
Place the magazine on the snap fastener balls (item 5 in fig. 8.1 - 7).
Press the magazine down evenly so that the snap fastener balls engage in all the snap fas-
teners at the same time.
8.1.2.7 Position detection
Each magazine of the nozzle changer has two fiducials: one for determining the position and one
for determining the angular position.
8
Fig. 8.1 - 8 Nozzle magazine - garage numbering, fiducials for determining the position and angular position
(1) Locking plate in the "magazine open" position
(2) Fiducial for determining the position
(3) Fiducial for determining the angular position
8 Station Extensions User manual SIPLACE CA-Series
8.1 Nozzle Changers From software version SC.708.0 Edition 12/2014 EN -DRAFT
458
8.1.2.8 "Row 2" Nozzle Changers for the SIPLACE SpeedStar (C&P20 M)
[00119716-xx] Nozzle changer 2, X-Series, C&P20
The "row 2 " nozzle changer can be fitted at the following locations, if no SWS is installed there:
CA4 machine: Locations 1, 2, 3 and 4 (see fig. 8.1 - 4
, page 450)
The retrofit package contains the nozzle changer and an assembly kit.
8
Fig. 8.1 - 9 Assembly kit for the "row 2" nozzle changer
User manual SIPLACE CA-Series 8 Station Extensions
From software version SC.708.0 Edition 12/2014 EN -DRAFT 8.1 Nozzle Changers
459
8.1.3 Nozzle Changes for the SIPLACE MultiStar and SpeedStar
Item no. 00119741-xx Nozzle changer for CPP, X-Series
8
Fig. 8.1 - 10 Nozzle changers for the SIPLACE MultiStar and SpeedStar
(1) Nozzle magazine for 20xx nozzles
(2) Nozzle magazine for 28xx nozzles
8.1.3.1 Description
This nozzle changer can be used both for the CPP head and the C&P20 M head. The magazines
are fitted onto a common carrier pate, are fixed with two cylinder pins and fastened with 4 push
buttons. The exact position is determined with two fiducials on each magazine. The correct seat
of the magazines on the carrier plate is monitored by microswitches, to prevent a collision of the
placement head with any magazines projecting upwards. All 6 magazine locations must be filled
since the safety circuit stops the machine in response to missing magazines or magazines that
are not seated correctly. The nozzle changer also recognizes whether the nozzle magazine is for
20xx nozzles, a 28xx nozzle magazine for the CPP head or a 10xx magazine for the C&P20 M
head, by the nozzle magazine code.
If a SpeedStar is used, no nozzle magazines for the MultiStar may be used.
At the nozzle station, components can be rejected with an air blast from the MultiStar or SpeedStar
nozzles. Both MultiStar and SpeedStar nozzles can be stripped off there and disposed of in the
reject bin.