00197498-03_UM_SiplaceCA-Serie_EN.pdf - 第493页
User manual SIPLACE CA-Series 8 Station Extensions From software version SC.708.0 Edition 12/20 14 EN -DRAFT 8.10 "Long Board" Option 493 8 For more informa tion, refer to the "Long Boa rd Option" ret…
8 Station Extensions User manual SIPLACE CA-Series
8.10 "Long Board" Option From software version SC.708.0 Edition 12/2014 EN -DRAFT
492
8.10 "Long Board" Option
[00119672-xx] Stopper, long board, SIPLACE HF/X/CA/D3
The following board formats can be placed using the CA-Series machines:
8
8
8
We can supply the Long board option as a retrofit kit for placing PCBs that are over 450 mm long.
If the Long board option is installed, then the following PCB formats can be processed:
8
The retrofit kit consists of the following parts:
– Mechanics, comp.: stopper, sensors, cable and assembly parts
– Optional CD for enabling the function on the SIPLACE Pro computer
– Retrofit instructions
Single conveyor (standard width) 50 mm x 50 mm up to 450 mm x 460
mm
Single conveyor: Wide board 50 mm x 50 mm up to 450 mm x 508
mm
Dual conveyor (standard width) 50 mm x 50 mm up to 450 mm x 216
mm
Dual conveyor: Wide board 50 mm x 50 mm up to 450 mm x 250
mm
Dual conveyor in single conveyor mode 50 mm x 50 mm up to 450 mm x 416
mm
Dual conveyor in "single conveyor", "wide board" mode 50 mm x 50 mm up to 450 mm x 450
mm
Single conveyor "long board" (standard width) 50 mm x 80 mm up to 610 mm x 460
mm
Single conveyor "wide board", "long board" 50 mm x 80 mm up to 610 mm x 508
mm
Dual conveyor "long board" 50 mm x 80 mm up to 610 mm x 216
mm
Dual conveyor "wide board", "long board" 50 mm x 80 mm up to 610 mm x 250
mm
Dual conveyor in "single conveyor", "long board" mode 50 mm x 80 mm up to 610 mm x 416
mm
Dual conveyor in "single conveyor", "wide board", "long
board" mode
50 mm x 80 mm up to 610 mm x 450
mm
User manual SIPLACE CA-Series 8 Station Extensions
From software version SC.708.0 Edition 12/2014 EN -DRAFT 8.10 "Long Board" Option
493
8
For more information, refer to the "Long Board Option" retrofit manual
[00193888-01].
PLEASE NOTE
The Long board option must be ordered 2x for the dual conveyor.
8 Station Extensions User manual SIPLACE CA-Series
8.11 Magnetic Pin Support From software version SC.708.0 Edition 12/2014 EN -DRAFT
494
8.11 Magnetic Pin Support
[00119680-xx] Magnetic pin support HS/HF/X/CA/D-Series
Wide boards tend to deflect during placement such that, under certain circumstances, the compo-
nents can no longer be placed with the desired accuracy. Highly curved PCBs also affect the
placement accuracy. This problem can be easily rectified by fitting magnetic pin supports on the
lifting table.
8
Fig. 8.11 - 1 Magnetic pin support