00197498-03_UM_SiplaceCA-Serie_EN.pdf - 第78页
2 Operational Safety User Manual SIPLACE CA- Series 2.6 Safety Instructions for Operating the Placement Mach ine From software version SC.708.0 Edition 12/2014 EN -DRAFT 78 2.6.10 ESD Safety of Machines 2 2.6.1 1 High T …
User Manual SIPLACE CA-Series 2 Operational Safety
From software version SC.708.0 Edition 12/2014 EN -DRAFT 2.6 Safety Instructions for Operating the Placement Machine
77
To avoid this risk, take hold of the underside of the grab recess on the waste tape container
with your fingers and place your thumbs on top of the grab recess.
Do NOT put your thumbs in the gap between the tape container and waste tape container as
you could trap your thumbs if you do.
2.6.9 Risk of Waste Bin Colliding with Component Sensor for SIPLACE C&P20 M
If the component or nozzle reject bin is not inserted correctly, it could collide with the component
sensor of the SIPLACE 20 M. To avoid this risk, the reject bin has been redesigned so that it reli-
ably slides into position when inserted at locations without the SWS. The height of the reject bin
was also reduced so as to prevent the risk of collision as far as possible when the bin is not in-
serted correctly.
To differentiate it, the new reject bin has item number 03003719-06. It can be ordered under this
item number with immediate effect.
2
Fig. 2.6 - 5 New reject bin
2
PLEASE NOTE
Replace all reject bins previously used in CA-Series machines with this new reject
bin.
Until this is done, make sure that the existing reject bins are inserted carefully.
CA-Series machines may only use the new reject bin [03003719-06].
The old reject bins can be used, for example, in HF machines, as these do not have
SIPLACE C&P20 M heads .
2 Operational Safety User Manual SIPLACE CA-Series
2.6 Safety Instructions for Operating the Placement Machine From software version SC.708.0 Edition 12/2014 EN -DRAFT
78
2.6.10 ESD Safety of Machines
2
2.6.11 High Temperatures at the C&P20 M Placement Heads During Continuous
Operation
2
Fig. 2.6 - 6 High temperatures at the C&P20 M head during continuous operation
(1) Temperature information plate [03031926-01]
(2) Housing for the star motor
(3) Handle
PLEASE NOTE
Requirements for ESD safety of machines
Only use nozzles that are identified as conductive.
User Manual SIPLACE CA-Series 2 Operational Safety
From software version SC.708.0 Edition 12/2014 EN -DRAFT 2.6 Safety Instructions for Operating the Placement Machine
79
2
2.6.12 High Temperatures on the X Feeder Modules During Continuous Operation
2
Fig. 2.6 - 7 High Temperatures on the X Feeder Modules During Continuous Operation
(1) Temperature information plate [03031926-01]
(2) Stepping motor
2
CAUTION
Risk of burns due to high temperatures!
The housing of the star motor and the handle on the placement head may become very
hot during continuous operation and in ambient temperature in excess of 22 °C.
Be careful when touching the parts.
CAUTION
Risk of burns due to high temperatures!
The stepping motors can become very hot during continuous operation and in an ambient
temperature in excess of 22 °C.
Be careful when touching the motors.