00197498-03_UM_SiplaceCA-Serie_EN.pdf - 第354页
6 Working with the Machine User Manual SIPLACE CA-Series 6.2 The User Interface From software version SC.708.0 Edition 12/2014 EN -DR AFT 354 6.2.5 Settings The "Settings" view allows you to change the vari ous…
User Manual SIPLACE CA-Series 6 Working with the Machine
From software version SC.708.0 Edition 12/2014 EN -DRAFT 6.2 The User Interface
353
The following view will open:
6
Fig. 6.2 - 4 User interface in the "WPC" view (example of SIPLACE SX shown)
Legend
(1) Vertical toolbar for "SIPLACE Wafer System" functions
(2) Buttons for changing directly to a different gantry
(3) "Up one level" button, to return to previous view (here: "Feeder modules, component and
nozzles" view, see previous diagram)
(1)
(2)
(3)
6 Working with the Machine User Manual SIPLACE CA-Series
6.2 The User Interface From software version SC.708.0 Edition 12/2014 EN -DRAFT
354
6.2.5 Settings
The "Settings" view allows you to change the various user settings, software options and machine
options.
Click on "Settings" in the toolbar .
The right-hand side shows an additional toolbar. The following table briefly describes the icons
and settings.
Icon Settings Description
Machine settings Only for "Advanced production", "Service customer" or "Service
SIPLACE".
Allows you to set the operating mode and options (e.g. running
options).
Allows you to shut down the machine
Allows you to change over to the operating system.
User settings Setting the operator level.
Allows you to set the language. As a default, English or German
can be selected. A language CD is provided for installation of other
languages.
Further options can be set from the "Advanced production" operator
level.
Machine options No options can be changed in the "Production" level.
Configuration of machine options.
Software options Only for "Advanced production", "Service customer" or "Service
SIPLACE".
Allows you to activate various test functions.
Overview of con-
nected external
systems
Shows all connected external systems (e.g. OIS, SetupCenter).
Shows the connection status and the memory used or deletes the
connected systems.
User Manual SIPLACE CA-Series 6 Working with the Machine
From software version SC.708.0 Edition 12/2014 EN -DRAFT 6.3 Alert Information and Online Help
355
6.3 Alert Information and Online Help
6.3.1 Error Messages
Each error message identified by a 5-digit number. This error number helps you to locate individ-
ual error messages in the lost of contents for the help system.
To access this, open the context-sensitive help tool in the user interface by clicking on the icon for
Information in the Help System for the station computer. The help text for the current error
message will be shown.
The text highlighted in green contains suggestions for solving the problem.
However, if the error message is based on a chain of faults, you will need to take the error mes-
sages in the whole chain in order to limit the number of possible causes.
6.3.2 Context-Sensitive Online Help
To see information about the current view, click on the icon to start the help system for the
station computer. Use the list of contents, index and the search function to view the contents of
the Online Help.