00197498-03_UM_SiplaceCA-Serie_EN.pdf - 第390页

6 Working with the Machine User Manual SIPLACE CA-Series 6.14 Docking/Undocking the Component Trolley From softw are version SC.708.0 Edition 12/2014 EN -DRAFT 390 6 6 6  Carefully push the compon ent trolley in to mach…

100%1 / 518
User Manual SIPLACE CA-Series 6 Working with the Machine
From software version SC.708.0 Edition 12/2014 EN -DRAFT 6.14 Docking/Undocking the Component Trolley
389
6
6.14.3 Docking the X-Series Component Trolley
6
Fig. 6.14 - 3 Component trolley and COT insert, SIPLACE X-Series
(1) Component trolley docking unit, SIPLACE X-Series
(2) Component trolley, SIPLACE X-Series
(3) Locking latches
WARNING
Observe the safety instructions for moving the component trolley in section 2.6.7,
page 76
.
6 Working with the Machine User Manual SIPLACE CA-Series
6.14 Docking/Undocking the Component Trolley From software version SC.708.0 Edition 12/2014 EN -DRAFT
390
6
6
6
Carefully push the component trolley into machine as far as the stop.
6
Press the appropriate button on the input or output side of the machine (item 1, 2, 3 or 4 in
fig. 6.14 - 1
) until the component trolley has been undocked.
Push the sleeve (item 1 in fig. 6.14 - 4) on both handles up and swivel the handle down (item
2 in fig. 6.14 - 4
).
CAUTION
Pushing in component trolley!
Only dock the component trolley onto the COT insert designed for it.
When pushing in the component trolley for the SIPLACE X-Series into the machine,
make sure that you do not hit the locking latches (item 3 in fig. 6.14 - 3
) against any
obstacles.
PLEASE NOTE
Cut tapes flush
If you do not cut tapes off flush at the front end of the X feeder modules, the emptied tapes
will not enter the empty tape duct.
Cut the tapes off flush, before you dock the X-Series component trolley.
CAUTION
Position of placement head!
Check that the placement head is outside the range of the component trolley.
PLEASE NOTE
Docking only possible if protective cover is closed
Close the protective covers.
User Manual SIPLACE CA-Series 6 Working with the Machine
From software version SC.708.0 Edition 12/2014 EN -DRAFT 6.14 Docking/Undocking the Component Trolley
391
6
Fig. 6.14 - 4 X-Series component trolley - swivel handles down
(1) Push sleeve up
(2) Fold handle down