00197498-03_UM_SiplaceCA-Serie_EN.pdf - 第351页
User Manual SIPLACE CA-Series 6 Working with the Machine From software version SC.708.0 Edition 12/2014 EN -DRAFT 6.2 The User Interface 351 6.2.4 Operating the St ation Sof twa re in the Views Most views which can be ac…
6 Working with the Machine User Manual SIPLACE CA-Series
6.2 The User Interface From software version SC.708.0 Edition 12/2014 EN -DRAFT
350
Notifications Shows notifications about current and previous events. The notifi-
cations vary according to their type. Individual tables can be viewed
for track errors, conveyor errors, machine errors, general errors and
linked error messages (see section 6.3
, page 355).
Statistics Shows the statistics for performance, quality and rejected material.
Shows the machine and board performance.
Starts the OIS (Operator Information System), for more information
refer to the OIS documentation.
Live image during
placement
Shows the individual live camera images.
Only available from operator level "Advanced Production" :
Allows you to view and save the Vision dump.
Maintenance sta-
tus
Contains information about the maintenance status of the machine.
Refer to the maintenance guide for further information.
Settings Contains all the settings and options.
Allows you to set the operator level and the user interface language.
Allows you to display and edit the machine settings, user settings,
machine options and software options, see section 6.2.5
, page 354.
Check sensors
and functions
Contains information and functions for tests and diagnoses.
Allows you to set the action performed when you press the start
button.
Only available from operator level "Advanced Production" :
Allows you to test the complete reference run and C&P20 head
functions.
Single functions and continuous runs. Each gantry is addressed
individually.
Service Service tools.
Only available from operator level "Service (customer)".
Allows you to set up and calibrate the SIPLACE placement ma-
chines, download embedded software versions, calibrate and con-
figure the entire machine.
Icon View Description
User Manual SIPLACE CA-Series 6 Working with the Machine
From software version SC.708.0 Edition 12/2014 EN -DRAFT 6.2 The User Interface
351
6.2.4 Operating the Station Software in the Views
Most views which can be accessed via the toolbar (see section 6.2.3, page 349) have an addi-
tional vertical toolbar with subviews and functions, on the right-hand side of the user interface.
6
Example: "Feeder modules, components and nozzles" view
Click on "Feeder modules, components and nozzles" in the toolbar .
PLEASE NOTE
For a detailed description of the individual functions refer to the Online Help.
6 Working with the Machine User Manual SIPLACE CA-Series
6.2 The User Interface From software version SC.708.0 Edition 12/2014 EN -DRAFT
352
The following view will open:
6
Fig. 6.2 - 3 User interface in the "Feeder modules, components and nozzles" view (example of SIPLACE CA4
shown)
Legend
(1) Toolbar ("Feeder modules, components and nozzles" button)
(2) Vertical toolbar in "Feeder modules, component and nozzles" view
(3) Processing area with 4 gantries
(4) Button for SIPLACE Wafer System (SWS) at location 2
Click, for example, on the SIPLACE Wafer System (SWS) of gantry 1 (button 4), to open the
SWS functions.
(1)
(2)
(3)
(4)