00197498-03_UM_SiplaceCA-Serie_EN.pdf - 第419页

User Manual SIPLACE CA-Series 7 Component and Die Handling From software version SC.708.0 Edition 12/20 14 EN -DRAFT 7.1 X Feeder Modules for SIPLACE X-Series 419 7.1.5.1 Feeder module adapter for t he X-Series with labe…

100%1 / 518
7 Component and Die Handling User Manual SIPLACE CA-Series
7.1 X Feeder Modules for SIPLACE X-Series From software version SC.708.0 Edition 12/2014 EN -DRAFT
418
7.1.5 Feeder Module Adapter for the X-Series
Item no. 00141305-xx Adapter for X-Series feeder modules
Item no. 00141308-xx Adapter plate for reject conveyor
Item no. 00141310-xx Adapter plate for label presenter
7
The spectrum of X tape feeder modules has been extended to include the linear vibratory feeder,
the label presenter and the reject conveyor. With an adapter, you can also convert the S linear
vibratory feeder, label presenter and reject conveyor for use with X-Series component trolleys.
The adapter performs electronic as well as mechanical functions: It converts the communication
signals from the S feeder modules into signals conforming to the extended X-Series protocol. Ad-
ditional functions, such as feeder module identification, have also been implemented.
7
PLEASE NOTE
S linear vibratory feeders, label presenters and reject conveyors can not be set up at
component trolleys if these are in the access range of a SpeedStar (C&P20).
User Manual SIPLACE CA-Series 7 Component and Die Handling
From software version SC.708.0 Edition 12/2014 EN -DRAFT 7.1 X Feeder Modules for SIPLACE X-Series
419
7.1.5.1 Feeder module adapter for the X-Series with label presenter
7
Fig. 7.1 - 16 Feeder module adapter for the X-Series with label presenter
(1) Adapter for X-Series feeder modules (item no. 00141305-xx)
(2) Adapter plate for label presenter (item no. 00141310-xx)
(3) Label presenter
7.1.5.2 Feeder Module Adapter for the X-Series with Linear Vibratory Feeder
7
7
PLEASE NOTE
Use of adapter plate
An adapter plate is supplied as standard with the adapter for X-Series feeder modules:
The adapter plate should be used for component heights up to 16.5 mm.
Component heights between 16.5 mm and 25 mm are processed without an adapter
plate.
7 Component and Die Handling User Manual SIPLACE CA-Series
7.1 X Feeder Modules for SIPLACE X-Series From software version SC.708.0 Edition 12/2014 EN -DRAFT
420
7
Fig. 7.1 - 17 Feeder module adapter for the X-Series with linear vibratory feeder
(1) Adapter for X-Series feeder modules (item no. 00141305-xx)
(2) Adapter plate 16.5 mm (in the deliverables)
(3) Linear vibratory feeder, type 3 (item no. 00142031-xx)
Width 34.4 mm
Tracks per feeder module 1, 2 or 3 7
Occupied feeder module locations 3 7
Stock of components Up to 150 per steel stick magazine, 7
depending on the component length 7
Specific data for stick magazines 9.5 mm wide / x 3 7
15 mm wide / x 2 7
> 15 mm wide / x 1 7
30 mm wide / 1 x 7
Vibrating time Variable with SIPLACE Pro from 400 to
over 1000 ms 7