00197498-03_UM_SiplaceCA-Serie_EN.pdf - 第24页
1 Introduction User manual SIPLACE CA-Series 1.2 Machine Description From software version SC.708.0 Edition 12/2014 EN -DRAFT 24 1 Fig. 1.2 - 1 Placement principle acco rding to the C ollect&Place procedure
User manual SIPLACE CA-Series 1 Introduction
From software version SC.708.0 Edition 12/2014 EN -DRAFT 1.2 Machine Description
23
1.2.1.2 SWS Installation Options
The SWS can be integrated into all 4 locations.
1
1.2.2 The SIPLACE Principle
The SIPLACE Wafer Systems make bare dies available in fixed pickup positions, for pickup with
the die attach or flip chip methods. The other components are made available by the fixed feeders
on the component trolley and on the trays of the Matrix Tray Changer. The placement heads pick
the bare dies and components up and place these on the waiting printed circuit boards.
The CA-Series placement machines have two placement areas:
– As in the case of SIPLACE X machines, up to two boards can be processed simultaneously
for single conveyors and up to four boards can be processed at the same time for dual con-
veyors.
The principle of the "stationary component supply" and "stationary PCB", which has proved highly
suitable for all SIPLACE placement machines, has a number of significant advantages:
– Refilling components or splicing on tapes does not cause downtime.
– The vibration-free feeding in of components enables reliable pickup of even the smallest com-
ponents (e.g. 03015) and bare dies.
– The PCB, which does not move during the placement process, prevents the components slip-
ping.
– The combination of placement heads with nozzle changers always guarantees an optimum
nozzle configuration for every placement process, thus minimizing traversing paths and opti-
mizing the placement sequence.
High flexibility, economic efficiency and reliable setups are the guarantee for the high level of pro-
ductivity in the SIPLACE CA-Series machines. Minimum down times increase utilization and thus
help to increase productivity.
Since this new concept combines at least two production lines to form a single line (SMD and bare
die placement), the investment costs and cost of ownership can be reduced significantly.
PLEASE NOTE
SWS types
There are two different variants of the SWS.
– The first type can be fitted at locations 2 and 4.
– The second type can be fitted at locations 1 and 3.
1 Introduction User manual SIPLACE CA-Series
1.2 Machine Description From software version SC.708.0 Edition 12/2014 EN -DRAFT
24
1
Fig. 1.2 - 1 Placement principle according to the Collect&Place procedure
User manual SIPLACE CA-Series 1 Introduction
From software version SC.708.0 Edition 12/2014 EN -DRAFT 1.2 Machine Description
25
1.2.3 Serial Number of SIPLACE CA Placement Machines
1
Fig. 1.2 - 2 Position of serial numbers on the placement machines
The serial number of SIPLACE CA placement machines can be found in two places.
– Without prefix zeros, e.g. B-1, the serial number can be found stamped onto the side of the
pneumatic unit (1), on the left side of the machine frame.
– With prefix zeros, e.g. B-001, the serial number can be found stamped onto the type plate (2).