00197498-03_UM_SiplaceCA-Serie_EN.pdf - 第377页
User Manual SIPLACE CA-Series 6 Working with the Machine From software version SC.708.0 Edition 12/20 14 EN -DRAFT 6.7 Configuring the Feeder Modules 377 On the operator pa nel, press the FORW ARD button (item 1 in fig…
6 Working with the Machine User Manual SIPLACE CA-Series
6.7 Configuring the Feeder Modules From software version SC.708.0 Edition 12/2014 EN -DRAFT
376
Guide the start of the tape beneath the pickup window (item 2 in fig. 6.7 - 5) and further until
the component tape is touching the sprocket wheel.
6
Fig. 6.7 - 5 Pickup window on the tape feeder module
(1) Tape support, removable
(2) Pickup window
(3) Removal edge for the cover foil
(4) Component pickup area
(5) Lever for raising and latching the pick-up window
User Manual SIPLACE CA-Series 6 Working with the Machine
From software version SC.708.0 Edition 12/2014 EN -DRAFT 6.7 Configuring the Feeder Modules
377
On the operator panel, press the FORWARD button (item 1 in fig. 6.7 - 6) until the bend of
the cover foil is in the component pickup area (item 4 in fig. 6.7 - 5
).
6
Fig. 6.7 - 6 Operating panel of feeder module
(1) FORWARD button for moving the component tape forward
(2) BACK button for moving the component tape back
(3) FOIL button for tensioning the cover foil
Push the lever (item 5 in fig. 6.7 - 5) forward in order to raise the pickup window (item 2 in fig.
6.7 - 5
) to the first position.
Pull the cover foil at the side of the pick-up window forward and out underneath the pick-up
window.
Fold the cover foil back until it lies against the pull-off edge (item 3 in fig. 6.7 - 5).
6
Push the lever (item 5 in fig. 6.7 - 5) back, to lower the pick-up window.
Guide the cover foil over the cover foil rocker (item 2 in fig. 6.7 - 7) until it reaches the foil
packing wheels (item 1 in fig. 6.7 - 7
).
PLEASE NOTE
Do not lower the pick-up window until the cover foil is lying against the pull-off edge.
6 Working with the Machine User Manual SIPLACE CA-Series
6.7 Configuring the Feeder Modules From software version SC.708.0 Edition 12/2014 EN -DRAFT
378
6
Fig. 6.7 - 7 Guiding the cover foil to the foil packing wheels
(1) Cover foil packing wheels
(2) Cover foil
6
On the operator panel, press the FOIL button (item 3 in fig. 6.7 - 6) until the cover foil is ten-
sioned. The cover foil rocker points down and stops the drive motor.
Cut the component tape flush with the front end of the feeder module.