YRM20_Ope_E.pdf - 第107页
2. Operation screen and buttons 2-10 Chapter 2 Basic operation 2. Operation screen and buttons The basic configuration and operation methods of the operation screens ar e explained in this section. n NOTE Because standar…
1. Before operation
2-9
Chapter 2 Basic operation
█
Language switch setting
The "Language switch setting" can be set by the following procedure.
1
Press the [Software Setting] button at bottom right of "Setup" screen.
2
Display the ”Massage Language setting” screen.
Select Display tab of "Software Setting" screen and press the [Message Language] button to display
the "Message Language setting" screen.
Displaying the "Message Language setting" screen
[Software Setting] button
[Message Language] button
24227-KMS-00
3
Specify the languages to be used and their order.
The "1. Languages to be used" and "2. Order of languages to be used" can be set at the "Message
Language setting" screen.
1. Tick the checkbox left to the language to be used.
2. Change the order of languages by selecting language and pressing the arrow buttons
displayed at right.
3. Press the [OK] button. Then the "Message Language setting" screen is closed, and the changed
setting is reflected.
Selecting the Message languages and setting their order
1. Selection of languages
to be used
2. Change the order of Message languages
24228-KMX-00
TIP
Though the procedure is illustrated with cursor, the keyboard with touch pad is optional item.
4
Press the [Close] button to close the "Software Setting" screen.
2. Operation screen and buttons
2-10
Chapter 2 Basic operation
2. Operation screen and buttons
The basic configuration and operation methods of the operation screens are explained in this section.
n
NOTE
Because standard specification systems have no keyboard or touchpad, all operations are performed using the touch-panel.
A dialog box displays at parameter input operations, and the desired operations and inputs can then be performed with
the touch-pen.
2.1 Basic configuration of operation screen
The operation screen consists of "Status area", "Main menu button area" and "Submenu button and parameter
area" as shown below.
Main menu button area 1
Main menu button area 2
Main menu button area
3
Status area
Operation screen basic configuration
Submenu button and parameter area
24201-KMX-00
►
Area on screen
Status area
Displays the current machine status (such as automatic operation,
error, emergency stop) on the left end, the selected board name in the
middle, next to it, the number of boards that have been produced, and
at the rightmost, operator's name who is logging-in.
Moreover, the mount compilation rate per each mounting table is
displayed in graph form at the background. See next section "Status
area details".
Main menu button area 1
Shows the main menu buttons used to operate the machine. The
submenu button and parameter area will change according to the
selected main menu button.
Main menu button area 2
Shows the menu buttons used to call up auxiliary functions of the
machine.
Main menu button area 3
Shows the [Off] button to turn off the machine and the [Language
Switch] button to switch display languages.
Submenu button and parameter
area
Displays the submenu buttons and parameters for machine operation
and data setting. This area will change according to the selected main
menu button.
2. Operation screen and buttons
2-11
Chapter 2 Basic operation
█
Status area details
Automatic operation, error, emergency stop
Machine status
Selected board information
Current production quantity
Name of logging-in operator
Mount compilation rate display
24232-KMX-00
• Number of produced board
Displays "Current production quantity / scheduled production quantity".
• Display of "Mount compilation rate"
The "Mount compilation rate" is displayed in graph form at the background of status area upon
starting automatic operation. The mount status per one board under production/per each mounting
stage can be checked here. The color of "Mount compilation rate" graph varies depending on
machine status.
Mount compilation rate
Mounting stage 1: 0%
Mounting stage 2: 0%
Mounting stage 1: 50%
Mounting stage 2: 25%
Mounting stage 1: 100%
Mounting stage 2: 100%
Mounting compilation rate of mounting stage 1
Mounting compilation rate of mounting stage 2
24233-KMX-00
TIP
The graph of mount compilation rate is displayed using the values calculated with the following formula.
Mount compilation rate (%) = (The number mount is completed / The number of all mounts) × 100
Note that the mount point where the mounting is not performed due to the bad mark for instance is not included in the
mount completion rate. Therefore, the final mount compilation rate may not be 100%. Additionally, the skipped mount point
is not included in the calculation.