YRM20_Ope_E.pdf - 第139页
3. Displaying the production monitors 2-42 Chapter 2 Basic operation 3.10 Schedule task When executing the schedu le tasks such as the “V acuum Check” or the “Nozz le T ip Cleanliness Check”, this screen shows the result…
3. Displaying the production monitors
2-41
Chapter 2 Basic operation
►
"Watch-and-wait" mode
The "watch-and-wait" mode is such that, if a pickup error occurs with a component, pressing the
[Current Check] button or the [All Check] button makes the machine system memorize the pickup rate at
that point. After that, the machine indicates by the color changes whether the pickup rate improves or
worsens.
For example, after an abnormal pickup rate is stored in "watch-and-wait" mode, if the problem is
eliminated and operation resumed, and the pickup rate improves, then the color of the row(s) changes
from "pink" to "yellow" to show an improvement has been made. Conversely, if the pickup rate becomes
even worse, then the color changes from "pink" back to "red" to show the troubleshooting was
ineffective.
The colors in the following graph show changes in the pickup rate, using an example when "caution
(yellow)" is set to 99.00% and "warning (red)" to 95.00%.
100
99
98
97
96
95
94
Color transitions per changes in pickup rates
Pickup rate %
Time
Changes to yellowStart (white)
Changes to yellow (better pickup rate)
Changes to red
Changes to red
(worse pickup rate)
Pressing the [Current Check] or [All Check] button enables
"watch-and-wait" mode and changes the color of "red" row(s) to
"pink".
23201-KMX-00
3. Displaying the production monitors
2-42
Chapter 2 Basic operation
3.10 Schedule task
When executing the schedule tasks such as the “Vacuum Check” or the “Nozzle Tip Cleanliness Check”, this
screen shows the results.
The display contents are updated after each schedule task has been completed. Additionally, the error
information by head and information showing the execution results are recorded into the history.
Monitor: Schedule task
Execution
result list
Arrow
mark
Manual operation button
Page number
display
24222-KMX-00
• Check Contents
Change the schedule task type to be displayed from the full-down list.
Target : "Vacuum Check" "Nozzle Tip Dirt Check" "Nozzle Shaft Cleaning Blow" "Nozzle Shape
Check" "Nozzle Alignment Check"
• Schedule Task Last Date
Displays the last date and time when the schedule task was executed.
• Execution result list
Displays the schedule task execution result.
OK : Schedule task is completed successfully.
NG/Error : Schedule task is terminated abnormally.
Blank : Schedule task is not implemented.
TIP
The list shows tables (head units) A through D. However, this machine shows values in A Table and B only.
3. Displaying the production monitors
2-43
Chapter 2 Basic operation
• Nozzle Type
Displays the nozzle type, for which the schedule task is executed.
• Arrow mark
Change multiple nozzle type displays.
• Page number display
Displays the current page number and maximum page number. This page number is not displayed when
there is only one page.
• Manual operation button
Allows you to manually execute the schedule task, such as “Cleaning Blow (Nozzle shaft cleaning
blow)”, “Tip Dirt Check”, “Vacuum Check”, “Buffing Check”, “Shape Check” and “Alignment Check”.