YRM20_Ope_E.pdf - 第136页

3. Displaying the production monitors 2-39 Chapter 2 Basic operation • No. Displays the component No. (Par ts screen data No.). • T able Displays the feeder table (feeder plate location) where the component feeder is ins…

100%1 / 220
3. Displaying the production monitors
2-38
Chapter 2 Basic operation
3.9 Pick Rate Warning
This screen appears when using the pickup rate warning function. When clicking the tab to switch the
display, the screen allows checking for a drop in the component pickup rate on each component or head.
The pickup rate is reset in real-time after mounting a group of components. However, if a particular
component or head is not used then its row will not appear on the display. Pickup rates can be monitored
by color during operation.
►
Display color
Color of
row
Status Pickup Rate Description
White 100% to [caution (yellow)]%
Pickup rate is above [caution (yellow)]% and
below (or equal to) 100%.
Yellow Caution
[caution (yellow)]% to [warning
(red)]%
Pickup rate is above [warning (red)]% and below
(or equal to) [Caution (yellow)]%.
Red Warning [warning (red)]% to 0%
Pickup rate is above (or equal to) 0% and below
(or equal to) [warning (red)]%.
If the machine setting of the stop control is set
to “Use”, the machine stops while generating an
alarm. The default setting is “Not Use”.
Pink
Watch-
and-wait
mode
Optional
When the pickup rate is [warning (red)]% or
less, pressing the [Current Check] or [All Check]
button enables "watch-and-wait" mode and the
color of the "red" row(s) changes to "pink".
Note that operation is not stopped in this mode
even if stop control setting is made.
n
NOTE
Numerical values (%) in brackets [ ] are machine data setting items. Accessing such parameters require the administrator
level of authority.
█
[Parts Info] tab
Monitor: Pick Rate Warning
Parts info
24220-KMX-00
3. Displaying the production monitors
2-39
Chapter 2 Basic operation
• No.
Displays the component No. (Parts screen data No.).
• Table
Displays the feeder table (feeder plate location) where the component feeder is installed.
• Set No.
Displays the feeder set position at which the component feeder is installed.
• Parts name
Displays the component name.
• Tape Type
The “Tape Type” shows the type of tape when the machine processes component tapes. It shows the
method of supplying components when processing tray components.
• Pick Rate (%)
Displays the pickup rate for each component. Rate is calculated by the following formula.
1 – ([Error count] ÷ [Number of components used]) = Pickup rate
• Feeder MACS
Displays the feeder MACS status.
• Offset X(mm), Y(mm)
Displays the offset amounts of the feeder MACS.
n
NOTE
The feeder MACS is a function that recognizes the mark at a specific location on the feeder to perform pickup offset
correction. This function normally applies to picking up components of 1005 or smaller.
█
[Head Info] tab
Monitor: Pick Rate Warning
Head info
24221-KMX-00
• Table
Displays the corresponding table. This machine shows “Table A”.
3. Displaying the production monitors
2-40
Chapter 2 Basic operation
• Head No.
Displays the head No. being used.
• Nozzle Type
Displays the current nozzle type.
• Head Type
Displays the method of changing the nozzle currently in use and other particulars such as automatic
nozzle change and manual nozzle change.
• Pick Rate (%)
Displays the pickup rate for each head. Rate is calculated by the following formula.
1 – ([Error count] ÷ [Number of components used]) = Pickup rate
• Nozzle MACS
Displays the nozzle MACS status.
n
NOTE
The nozzle MACS is a function that detects the position of the nozzle set up on a head to perform pickup offset correction.
Similar to the feeder MACS, this function applies to the nozzles that pick up components of 1005 or smaller.
• Center XY(mm), Offset XY(mm)
Displays the offset amounts of the nozzle MACS.
• [Current Check] button
Selecting a component (row) from among components with abnormal pickup rates (rows shown in
"red") and clicking this button sets "watch-and-wait" mode for that component.
• [All Check] button
Clicking this button sets "watch-and-wait" mode for all components with abnormal pickup rates (rows
shown in "red").