YRM20_Ope_E.pdf - 第27页
1. Using this manual i About this manual 1. Using this manual This manual is intended for machine operators, and mainly describes how to handle and operate Y AMAHA surface mounters and related equipment. T o use the mach…
The instruction manual of this machine is written for those who operate
this machine.
Please read this manual carefully for correct operations and pay special
attention to safety precautions.
After reading through this manual, please use this manual as an
occasional reference and keep it within reach.
About this manual
Contents
1. Using this manual i
1.1 Contents of each chapter ii
1.2 Page layout iii
1. Using this manual
i
About this manual
1. Using this manual
This manual is intended for machine operators, and mainly describes how to handle and operate
YAMAHA surface mounters and related equipment.
To use the machines safely and correctly, be sure to read this manual thoroughly before use.
c
CAUTION
Before using the machines, always read the "Safety instructions" in this manual and comply with instructions and rules
regarding safety.
n
NOTE
The control wiring diagram, maintenance support items, error message list and the like can be downloaded from YAMAHA
Service website. See Appendix,"A2. YAMAHA Service website for user" for details.
c
CAUTION
The parts (Part Nos.) in this manual are at the time of issuing this manual. The Part Nos. may be changed without prior
notice. Make sure to verify the latest Part Nos. before ordering.
1. Using this manual
ii
About this manual
1.1 Contents of each chapter
This manual is comprised of the following chapters.
Safety instructions
This section provides safety instructions essential when using the machine.
About this manual
Chapter 1 Part names and functions
Explains major part names and functions of the machine that you should know before attempting
operation.
Chapter 2 Basic operation
• Explains how to use buttons and screen descriptions.
• Explains how to set components up on the tape feeder and set it up on the machine.
• Explains typical errors and their remedial actions.
Chapter 3 Starting up the machine and manufacturing products
Explains a series of procedures from starting up the machine, manufacturing and ending manufacturing.
Appendix
Contains machine specifications.
Index
The index at the end of this manual helps you quickly find where necessary items are explained.